ANSI/API-6D/JIS/DIN Electric Four-Way 4-Way Flanged Ss CS Ball Valve Q946f

  • Model NO.: DN15-DN700
  • Connection Form: Flange,Thread,Clamp,Weld
  • Nominal Pressure: DIN Pn16-64,JIS 10K/20K,Cl 150/300lb
  • Structure: Floating or Trunnion Mounted Type
  • Function: Change Direction
  • Application: Industrial Usage, Water Industrial Usage, Household Usage
  • Certificates: Ce,Ts,API,ISO9001
  • Transport Package: Packing with Plywood Case
  • Origin: China
  • Material: CF8, Wcb/CF8m/CF3/CF3m Available
  • Driving Mode: Electric
  • Channel: 4-Way,L/L Port
  • Type: 4-Way,L/L Port
  • Temperature: Normal Temperature
  • National Patent: Zl201120532546.3
  • Trademark: neutral brand or customizable
  • Specification: DN15-DN500
  • HS Code: 8481804090
Electric 4-way ball valve
Main Parameter
Working Pressure(PN): DIN Pn1.6-6.4MPa,JIS 10K/20K,CL 150/300lb
Body: WCB/CF8/CF8M/CF3/CF3M
Ball: 2Cr13/15CrMo/25Cr2MoV/304/304L/316/316L,float or trunnion
Stem: 2Cr13/15CrMo/25Cr2MoV/304/304L/316/316L
Seal: PTFE/RPTFE/PPL
Port: DN15-DN500,L/L port
Flange: DIN PN16-64,JIS-10K/20K,ANSI-150/300LB,other standard flange available
Standard:  DIN 2543-2545/DIN 2501,JIS B2073/2083,ASME B16.34
Test: DIN 3230/EN 12266,JIS B2003,API598  
Medium: water,oil,steam,liquefied gas
Connection: weld,thread,flange,clamp
Temp.: -40ºC--290ºC

 
Technical Parameters
Working environments Temperature: -30'C~+70'C(can be customized to -45'C~+85'C)
Relatively humidity: 95%(25'C)
Pressure: 86kPa~106kPa
Power Supply Single phase: 220V 50Hz   Three phase:380V 50Hz
Tolerance: Single phase Voltage(-15%/+10%)  Three phase Voltage(±10%)
Frequency(±5%),  harmonic   content (<5%), Direct Current (±10%)
Insulation resistance 1)Resistance between input terminal and case should be more than 20M .
2)Resistance between input terminal and power supply terminal should be more than 50M .
3)Resistance between power supply terminal and case should be more than 50M .
The motor insulation level  Level F(Level H is selectable)
Protection level IP68(underwater 20M\96hours)
Anti-explosion level EXD IIBT4\EXD IICT4
 
On-Off Type
Start frequency 650 times per hour
Designed lifetime Minimum maintenance-free time:30,000 times
Working form Short time working type, rated run time will be 15mins(customized to 30mins)
 
Regulated Type
Start Frequency 1200 times per hour
Designed lifetime No less than  times
Working form Intermittent periodic-type, minimum rated load sustained rate is 25%
Basic parameters Basic error: ≤ ±0.1%
Hysteresis: ≤ 0.5%
Dead zone: 0.1%~9.9% continuously adjustable
Damping characteristic: undamped
Input and output signal Analogue input 4-20mADC, input impedance ≤ 250 ;
Analogue output4-20mADC, load resistance ≥ 750 ;
Linear error ≤ 0.5%;
Supply voltage: 24VDC provided by internal actuator;
Actuator with a build-in servo amplifier;
Input and output signal channel take  optoelectronic   isolation 
Passive junction capacity: 250V/5A AC; 30V/5A DC.
ANSI/API-6D/JIS/DIN Electric Four-Way 4-Way Flanged Ss CS Ball Valve Q946f
ANSI/API-6D/JIS/DIN Electric Four-Way 4-Way Flanged Ss CS Ball Valve Q946f
ANSI/API-6D/JIS/DIN Electric Four-Way 4-Way Flanged Ss CS Ball Valve Q946f









 

AIM

The AIM is a new type of high-efficient anti deformation reinforcing agent.

It is an elastomer with space network structure synthesized by Chlorinated Polyethylene and bio based polyester (new rubber) through micro crosslinking. It has good compatibility with PVC and can completely replace CPE and ACR.


Anti Deformation Enhancer,Efficient Enhancer Aim,Deformation Enhancer Agent,Anti Deformation Reinforcing Agent

Hebei Fengse New Material Technology Co.ltd. , https://www.hbfengsechemical.com