1. When the cold car is difficult to start in winter, close the choke valve and start the engine. After the hot car, pay attention to opening the choke valve in time. It is forbidden to drive at high speed for a long time when the choke valve is closed.
2. Riding bikes (male vehicles) are prohibited to install windshields or other decorative items in front of the engine and muffler, which will affect the heat dissipation of the engine and muffler.
3. Do not drive for a long time under heavy load in low gear. This will cause damage to the engine and muffler.
4. Do not hit the throttle at high speed in situ for a long time.
5. When the surface of the muffler is oily, the surface of the muffler will change color yellow, blue, etc. after the hot car. In addition, when the muffler surface has a lot of mud and other dirt, please clean up in time, so as not to affect its heat dissipation.
6. When installing the muffler, it should be noted that the muffler pad is installed in place and fastened tightly to prevent air leakage, affecting the muffler effect and causing yellowing of the muffler interface.
7. The engine valve clearance, carburetor, air filter, etc. should be adjusted and cleaned in a timely manner according to the vehicle instructions. If the valve clearance is too small or the mixture gas is too rich or too thin, it will affect the combustion and cause discoloration due to the influence of the muffler. .
2. Riding bikes (male vehicles) are prohibited to install windshields or other decorative items in front of the engine and muffler, which will affect the heat dissipation of the engine and muffler.
3. Do not drive for a long time under heavy load in low gear. This will cause damage to the engine and muffler.
4. Do not hit the throttle at high speed in situ for a long time.
5. When the surface of the muffler is oily, the surface of the muffler will change color yellow, blue, etc. after the hot car. In addition, when the muffler surface has a lot of mud and other dirt, please clean up in time, so as not to affect its heat dissipation.
6. When installing the muffler, it should be noted that the muffler pad is installed in place and fastened tightly to prevent air leakage, affecting the muffler effect and causing yellowing of the muffler interface.
7. The engine valve clearance, carburetor, air filter, etc. should be adjusted and cleaned in a timely manner according to the vehicle instructions. If the valve clearance is too small or the mixture gas is too rich or too thin, it will affect the combustion and cause discoloration due to the influence of the muffler. .
To prevent spontaneous combustion, durable and corrosion resistant, suitable for most hazardous chemicals
Wuxi Huanawell Metal Manufacturing Co., Ltd. , https://www.hnwmetal.com