CD6240Cx1000 big spindle bore high speed engine lathe machine

Model NO.: CD6240Cx1000
Automatic Grade: Semiautomatic
Setting Mode: Table
Precision: High Precision
Certification: CE
Condition: New
control voltage: 24V
max swing over bed: 400mm
max workpiece length: 1000mm
spindle bore dia: 82mm
Trademark: HYMT
Transport Package: Wooden Case
Specification: swing over bed 400x1000mm
Origin: China
HS Code: 84581900
Model NO.: CD6240Cx1000
Automatic Grade: Semiautomatic
Setting Mode: Table
Precision: High Precision
Certification: CE
Condition: New
control voltage: 24V
max swing over bed: 400mm
max workpiece length: 1000mm
spindle bore dia: 82mm
Trademark: HYMT
Transport Package: Wooden Case
Specification: swing over bed 400x1000mm
Origin: China
HS Code: 84581900
CD6240Cx1000 big spindle bore high speed engine lathe machine
CD6240Cx1000 big spindle bore high speed engine lathe machineCD6240Cx1000 big spindle bore high speed engine lathe machineCD6240Cx1000 big spindle bore high speed engine lathe machineCD6240Cx1000 big spindle bore high speed engine lathe machineMAIN FEATURES: 
1). Large spindle bore of 65mm; 
2). Main spindle dynamic balanced, and supported at 2 points with taper roller bearings of Harbin
brand;
3). Outward appearance featuring large plains, making the machine more good-looking; 
4). Gapped bedways, which are super-audio frequency hardened; 
5). All gears hardened and ground by Reishauer grinding machine; 
6). Leadscrew and feedrod interlocked, both with overload protection;
7). Automatic feed stopper; 
8). Configuration variable totally according to orders:
Metric or inch system; right or left hand wheel; large plane type; halogen lamp; quick change tool past; DRO; T-slot compound; chuck guard; leadscrew hood; rapid traverse motor; electromagnetic brake; forced lubrication system.
Standard Accessories:
3-jaw chuck 250mm
Driving plate
Center & center sleeve
Wrenches
Oil gun
Operation manual
Optional Accessories:
Steady rest
Follower rest
4-jaw chuck 320mm
Face plate
Thread dial
Longitudinal automatic trip
Live center
Quick change toolpost
Taper copy ruler
4-position longitudinal automatic trip
Main Parameters:
MODEL
 		 CD6140B
CD6240B		 CD6150B
CD6250B		 CD6160B
CD6260B
CAPACITIES Max. swing over bed (mm) 400(16″) 500(20″) 600(24″)
Max. swing over cross slide(mm) 225(9") 325mm(13") 360(14″)
Center distance (mm) 1000\1500\2000
Center high (mm) 250
Max swing in gap (mm) 530(21″) 630(25″) 730(29″)
Valid length of gap 260mm (10′/4″)
Bed width 330mm(13″)
HEADSTOCK
 		 Spindle hole 65mm(23/5″)
Spindle nose ISO-C6 or ISO-D6
Spindle taper Metric 70mm
Spindle speeds (Number) 22-1800rpm (15 steps)
FEEDS Metric threads range (Kinds) 0.5-28mm (66kinds)
Inch Threads range (Kinds) 1-56 tpi (66kinds)
Module threads range (Kinds) 0.5-3.5mm (33kinds)
Diametral threads range (Kinds) 8-56 tpi (33kins)
Diametral threads range (Kinds) 0.072-4.038mm/rev(0.0027-0.15 inch/rev) (66kinds)
Cross feeds range (Kinds) 0.036-2.019mm/rev(0.0013-0.075 inch/rev) (66kinds)
Rapid traveling speed of carriage 5m/min (16.4ft/min)
Leadscrew size: Diameter/Pitch 35mm/6mm(1/4″)
CARRIAGE Cross slide travel 300mm (13″)
Compound rest travel 130mm(5″)
Cross-section size of toolshank 25*20mm/(1*6/8inch) 25*25mm
TAILSTOCK Taper of tailstock sleeve Morse No.5
Diameter of tailstock sleeve 65mm(23/5″)
Travel of tailstock sleeve 120mm(43/4″)
MOTOR Main drive motor 4.0kw or 5.5kw  7.5kw
Coolant pump motor 0.125kw
Rapid traverse moter 0.12kw
PACKING SIZE
(L*W*D)		 1000mm 2420*1150*1800mm
1500mm 2920*1150*1800mm
2000mm 3460*1150*1800mm
 
 Model CD6140C
CD6240C		 CD6150C
CD6250C		 CD6160C
CD6260C
CAPACTIES Max. swing over bed mm 400 500 600
  Max. swing over cross slide mm 225 325 360
  Max. swing in gap mm 530 630 730
  Center distance 1000,1500, 2000mm
  Cross slide travel mm 330mm
SPINDLE Spindle hole 80mm
  Spindle nose ISO-C8 or ISO-D8
  Spindle taper Metric 85mm
  Spindle speeds 24-1600rpm (15 Steps)
FEEDS Metric threads range (Kinds) 0.5-28mm (66Kinds)
  Inch threads range (Kinds) 1-56tpi (66 Kinds)
  Module threads range (Kinds) 0.5-3.5mm (33 Kinds)
  Diametral threads range (Kinds) 8-56 DP (33 Kinds)
  Longitudinal feeds range(kinds) 0.072-4.038mm/reV(0.0027-0.15inch/rev)(66kinds)
  Cross feeds range (kinds) 0.036-2.019mm/reV(0.0013-0.075nch/rev)(66kinds)
  Rapid traveling speed of carriage 5m/min(16.4ft/min)
  Leadscrew size:Diameter pitch 35mm/6mm or 35mm
CARRIAGE Cross slide travel 300mm
  Compound rest travel 130mm
  Cross-section size of tool shank 25x25mm
TAILSTOCK Spindle diameter 65mm
  Spindle taper Morse No. 5
  Spindle travel 120mm
Main motor Main drive motor 4.0kw or 5.5kw 7.5kw
  Coolant pump motor 0.125kw
  Rapid traverse motor 0.12kw
Net weight/Gross weight(kg) 1000mm 1640/2290 1700/2350 1800/2500
  1500mm 1850/2250 1910/2610 2010/2760
  2000mm 2090/2860 2150/2920 2250/3070
PACKING SIZE
(L*W*D)		 1000mm 2420*1150*1800mm
  1500mm 2920*1150*1800mm
  2000mm 3460*1150*1800mm

Our services:
1.Standardization of Service "212"
2: response in 2 hours
1: provide solution in 1 day
2: solve complaint in 2 days
2.Installation Service
Installation Services are available with all HYMT machines. We dispatch technician to customer's 
factory for installation and preoperation of machines.
3.Training Service
Our technician is available to your factory and offer training of how to use our machines. As well, you
 may send your technician to our company to learn how to operate machines.
4.Quality Guarantee
We guarantee the quality of machine (e.g. processing speed and working performance is the same as the data of samples making). We sign the agreement with detailed technical data.
We arrange final test before shipment. We run the machine for a few days, and then use customer's materials for test. After making sure machine is the best performance, then make shipments.
CD6240Cx1000 big spindle bore high speed engine lathe machine
CD6240Cx1000 big spindle bore high speed engine lathe machineCD6240Cx1000 big spindle bore high speed engine lathe machineCD6240Cx1000 big spindle bore high speed engine lathe machineCD6240Cx1000 big spindle bore high speed engine lathe machineMAIN FEATURES: 
1). Large spindle bore of 65mm; 
2). Main spindle dynamic balanced, and supported at 2 points with taper roller bearings of Harbin
brand;
3). Outward appearance featuring large plains, making the machine more good-looking; 
4). Gapped bedways, which are super-audio frequency hardened; 
5). All gears hardened and ground by Reishauer grinding machine; 
6). Leadscrew and feedrod interlocked, both with overload protection;
7). Automatic feed stopper; 
8). Configuration variable totally according to orders:
Metric or inch system; right or left hand wheel; large plane type; halogen lamp; quick change tool past; DRO; T-slot compound; chuck guard; leadscrew hood; rapid traverse motor; electromagnetic brake; forced lubrication system.
Standard Accessories:
3-jaw chuck 250mm
Driving plate
Center & center sleeve
Wrenches
Oil gun
Operation manual
Optional Accessories:
Steady rest
Follower rest
4-jaw chuck 320mm
Face plate
Thread dial
Longitudinal automatic trip
Live center
Quick change toolpost
Taper copy ruler
4-position longitudinal automatic trip
Main Parameters:
MODEL
 		 CD6140B
CD6240B		 CD6150B
CD6250B		 CD6160B
CD6260B
CAPACITIES Max. swing over bed (mm) 400(16″) 500(20″) 600(24″)
Max. swing over cross slide(mm) 225(9") 325mm(13") 360(14″)
Center distance (mm) 1000\1500\2000
Center high (mm) 250
Max swing in gap (mm) 530(21″) 630(25″) 730(29″)
Valid length of gap 260mm (10′/4″)
Bed width 330mm(13″)
HEADSTOCK
 		 Spindle hole 65mm(23/5″)
Spindle nose ISO-C6 or ISO-D6
Spindle taper Metric 70mm
Spindle speeds (Number) 22-1800rpm (15 steps)
FEEDS Metric threads range (Kinds) 0.5-28mm (66kinds)
Inch Threads range (Kinds) 1-56 tpi (66kinds)
Module threads range (Kinds) 0.5-3.5mm (33kinds)
Diametral threads range (Kinds) 8-56 tpi (33kins)
Diametral threads range (Kinds) 0.072-4.038mm/rev(0.0027-0.15 inch/rev) (66kinds)
Cross feeds range (Kinds) 0.036-2.019mm/rev(0.0013-0.075 inch/rev) (66kinds)
Rapid traveling speed of carriage 5m/min (16.4ft/min)
Leadscrew size: Diameter/Pitch 35mm/6mm(1/4″)
CARRIAGE Cross slide travel 300mm (13″)
Compound rest travel 130mm(5″)
Cross-section size of toolshank 25*20mm/(1*6/8inch) 25*25mm
TAILSTOCK Taper of tailstock sleeve Morse No.5
Diameter of tailstock sleeve 65mm(23/5″)
Travel of tailstock sleeve 120mm(43/4″)
MOTOR Main drive motor 4.0kw or 5.5kw  7.5kw
Coolant pump motor 0.125kw
Rapid traverse moter 0.12kw
PACKING SIZE
(L*W*D)		 1000mm 2420*1150*1800mm
1500mm 2920*1150*1800mm
2000mm 3460*1150*1800mm
 
 Model CD6140C
CD6240C		 CD6150C
CD6250C		 CD6160C
CD6260C
CAPACTIES Max. swing over bed mm 400 500 600
  Max. swing over cross slide mm 225 325 360
  Max. swing in gap mm 530 630 730
  Center distance 1000,1500, 2000mm
  Cross slide travel mm 330mm
SPINDLE Spindle hole 80mm
  Spindle nose ISO-C8 or ISO-D8
  Spindle taper Metric 85mm
  Spindle speeds 24-1600rpm (15 Steps)
FEEDS Metric threads range (Kinds) 0.5-28mm (66Kinds)
  Inch threads range (Kinds) 1-56tpi (66 Kinds)
  Module threads range (Kinds) 0.5-3.5mm (33 Kinds)
  Diametral threads range (Kinds) 8-56 DP (33 Kinds)
  Longitudinal feeds range(kinds) 0.072-4.038mm/reV(0.0027-0.15inch/rev)(66kinds)
  Cross feeds range (kinds) 0.036-2.019mm/reV(0.0013-0.075nch/rev)(66kinds)
  Rapid traveling speed of carriage 5m/min(16.4ft/min)
  Leadscrew size:Diameter pitch 35mm/6mm or 35mm
CARRIAGE Cross slide travel 300mm
  Compound rest travel 130mm
  Cross-section size of tool shank 25x25mm
TAILSTOCK Spindle diameter 65mm
  Spindle taper Morse No. 5
  Spindle travel 120mm
Main motor Main drive motor 4.0kw or 5.5kw 7.5kw
  Coolant pump motor 0.125kw
  Rapid traverse motor 0.12kw
Net weight/Gross weight(kg) 1000mm 1640/2290 1700/2350 1800/2500
  1500mm 1850/2250 1910/2610 2010/2760
  2000mm 2090/2860 2150/2920 2250/3070
PACKING SIZE
(L*W*D)		 1000mm 2420*1150*1800mm
  1500mm 2920*1150*1800mm
  2000mm 3460*1150*1800mm

Our services:
1.Standardization of Service "212"
2: response in 2 hours
1: provide solution in 1 day
2: solve complaint in 2 days
2.Installation Service
Installation Services are available with all HYMT machines. We dispatch technician to customer's 
factory for installation and preoperation of machines.
3.Training Service
Our technician is available to your factory and offer training of how to use our machines. As well, you
 may send your technician to our company to learn how to operate machines.
4.Quality Guarantee
We guarantee the quality of machine (e.g. processing speed and working performance is the same as the data of samples making). We sign the agreement with detailed technical data.
We arrange final test before shipment. We run the machine for a few days, and then use customer's materials for test. After making sure machine is the best performance, then make shipments.

Centralized Fume Extraction Systems

Centralized Fume Extraction Systems,Laser Cutting Fume Purifier,Laser Cutting Fume Extractor,Laser Cutting Smoke Purifier

Jinan Moland Environmental Tech Co.,Ltd , https://www.sdmoland.com