Charging characteristics of the special power supply arrester for charging piles

In recent years, with new energy and our lives getting closer and closer, new energy vehicles have also developed greatly, which requires a large number of charging needs. However, most of the charging piles are outdoors and are vulnerable to induced lightning surges. When subjected to a lightning strike, the electronic system and communication system of the charging pile can be easily damaged, which will result in the vehicle not being able to charge, or the vehicle being charged. This may have serious consequences, and the cost of post-maintenance is also considerable.


According to the provisions of GB50057 and GB50343, for special equipment that needs protection, the rated value of impact voltage (UW) should not exceed 1.5 kV. The corresponding power SPDs belong to Class C power protection with a current rating of 20kA to 40kA and a maximum continuous operating voltage of AC385V. For the protection of the charging pile, a professional charging pile power supply lightning protector can be used. This kind of lightning protection device generally has the following characteristics:

1. The critical control point of this type of lightning arrester is that the voltage protection level (Up) should be less than the UW design;

Second, the use of high-performance MOV, with high reliability;

Third, with work failure indication, optional remote alarm function;

Fourth, and the use of temperature control protection circuit, built-in thermal protection, automatic short-circuit failure device;

Fifth, the use of standard modular design, easy installation and easy maintenance. Can effectively protect the charging pile from lightning strikes.


Looking at the trend of automobile development, more and more electric vehicles will be used in the future. Charging piles will also develop along with it. Charging piles are an essential part of electric vehicles and cannot be neglected in safety maintenance. It is necessary to plan the installation of lightning protection facilities. In order to reduce the trouble of future maintenance, it is better to install special lightning protection devices for the charging piles to prevent losses caused by lightning strikes.

Transmission Line Steel Tubular Pole

We have got 220kV Transmission Line poles Quality Certificate from Power Industry Steel Tower Qualified Inspection & Test Center from 2001 year. Our steel poles are made from quality sheet through bending, forming, automatic welding and hot galvanization. We can reach one-run machining length of 14m and can bend sheet of thickness up to 45mm. We adopt advanced welding procedures, automatically weld main joints and reach rank-II welding quality.

We have supplied 2400ton 132kV and 220kV transmission line steel pole to WAPDA. Pakistan on 2008 and have supplied 1200ton 138kV transmission line steel pole to Davao light, Philippines on 2009.

Transmission Line Steel Tubular Pole, Tubular Steel Pole, Steel Tubular Pole, Utility Pole

Jiangsu Xinjinlei Steel Industry Co., Ltd. , https://www.steelpolejl.com