China Factory The Cheapest and Superior Quality Natural Rubber Tubes Wheel Barrow Tube

  * Below are the best selling products:
OTR tyres: L-3, L-5 and G-2 series, with tube and tubeless ones.

Industrial tyres: Inflated and Solid forklift tyres, L-2 skid steer/ bobcat tyre, R4 tubeless tyre, 
R3 road roller tyre.

Agricultural tyres: R-1 tractor tyre, F2 direction tyre, F3 and I-1 implement tyre.

TBB: all sizes of truck and bus bias tyres.

LTB: all sizes of light truck bias tyres.

Tube: natural rubber and butyl ones for all sizes.

Flap: all sizes of flaps are available.


 

* Company Introduction:

    Qingdao Wangyu Rubber Co., Ltd was established in 1996, located in Pingdu, Qingdao, Shandong Province. Our manufactory covers an area of 100,000 sqm with fixed assets of RMB 120 million. We are equipped with advanced equipments such as full-automatic capsules anti-package molding machine, tread winding machines. We have also invested 20 million RMB in 2013 in building mixing center, which has been put into use. All these have greatly improved the quality of our products.

We are QINGDAO WANGYU RUBBER CO.,LTD, bias tyre factory for over 22 years. Here are the details.

1. Factory established in 1996;

2. Specialized inAgricultural tyres, OTR tyres, Industrial tyres, TBB tyres, LTB tyres, inner tube and flaps;

3. Covering an area of 100,000 sqm;

4.Total number of employees:620      professionals:78;

5. Export volume: >100 HC per month; 

6. Main market: Europe, America, Middle East, Southeast Asia, Africa;

7.Certificate: DOT  ISO9001:2008    CCC;

8. Brand: TOP TRUST, ALL WIN, SUNNINESS.







 

* Exhibitions and Certificates:

 

 

 

 

Welcome you to come to consult, to order wholeheartedly with you to win-win cooperation,common development, create brilliant!

Heat Exchanger Plate&gasket

Plate and gasket are the critical part of a removable Plate Heat Exchanger. The main function of the plate is to isolate the medium and perform heat exchange. Its main materials are stainless steel (304/304L, 316/316L, 254SMO), titanium, nickel, titanium-palladium alloy, Hastelloy, etc. The sealing gasket is installed in the gasket groove around the plates to seal the periphery between the plates to prevent the fluid from leaking out, and according to the design requirements, seal part of the corner holes so that the hot and cold media flow according to their own flow paths. The structure of the plate heat exchanger consists of a fixed frame, a movable frame and corrugated plates sandwiched between the two frames. Hot and cold liquids pass sequentially through the area between the corrugated plates separated by sealed elastomer paths. To prevent leaks, good gasket elastomers are installed around the perimeter of the plates and large fastening bolts are used to hold the plates together. The structure of the plate heat exchanger makes sealing a key part of this equipment, responsible for the service life of the entire equipment. Depending on the process medium, the gasket must be chemically and/or temperature resistant. Spetech supplies seals for most existing plate heat exchangers: power industry, petroleum processing, food and beverage industry, sugar industry, chemical, pulp and paper industry. The most commonly used materials are: NBR, HNBR, EPDM, FPM (different grades). There are two basic ideas for the installation of seals: glue seals and clip seals. Clip-on washers do not require any adhesives for installation. This modification makes it possible to mount the spacers by installing clips in the grooves in the plate. As a result, the gasket is highly resistant to pressure and can be replaced quickly and easily.

Heat Exchanger Plate&Gasket,Phe Gasket,Gea Gasket,Nbr Gasket

Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.heatexchangerjiema.com