Deputy Director Zhang Qingyu emphasized that the reforming test of the dryer is an important measure for the food sector to implement the national and provincial requirements for environmental environmental remediation. It is necessary to complete the transformation tasks according to technical specifications and time limits while ensuring safety. And in time to do the test machine work and running test preparation before grain drying. At the same time, put forward specific requirements for the reform test, one is to firmly establish the concept of safe development. Strictly implement the safety production responsibility system, resolutely put an end to safety hazards, ensure the safety of dryer modification, testing and post-drying operations; second, develop strict operating procedures. Manufacturers should provide complete operating instructions, hang in a prominent position in the boiler room, and set warning signs in the location of potential safety hazards, and at the same time do personnel training. Third, the boiler transformation should be connected with the original drying tower. The grain depot should assign full-time personnel to participate in the transformation, coordinate the technical personnel of the boiler manufacturer and the drying tower manufacturer, carefully study the process integration, and make the furnace towers united and operate effectively. The fourth is to seek truth from facts and do a good job of running tests. The provincial grain storage and storage company shall improve the testing plan and develop a test data record form; the test unit shall record all technical indicators conscientiously and truthfully, and comprehensively and accurately measure the drying operation cost, sewage discharge status, and matters needing improvement during the transformation process. Provide effective support.
Provincial Bureau of Warehousing (Project Office), Safety Supervision Department, Provincial Reserve Grain Storage and Storage Co., Ltd., the provincial grain science and technology institute, the main responsible comrades and related personnel accompanied the investigation, the head of the storage and management department of the China Grain Storage Jilin Branch participated in the survey.
FIBER LASER CUTTING MACHINES
UTECH`s fiber laser machines are a must-have if you`re looking for quick and accurate cuts on sheets of metal. Metal fabrication shops and companies that manufacture customized metal parts can drastically improve their efficiency of production with our fiber laser cutting machines. Our machines are capable of cutting steel, brass, aluminum and stainless steel without fear of back reflections damaging the machine. By using these fiber laser machines, you`ll reduce your maintenance requirements and cut your operating costs considerably.
FIND THE RIGHT Fiber Laser Cutting Machine:
Product Application:
• Manufactured by people who use their own machines.
• The resonator comes with a 100,000 hour warranty from the manufacturer (IPG/Raycus)
• Higher cutting speeds possible
• Dual interchangeable tables allow for faster loading and unloading, reducing downtime
• Laser wavelength is one-tenth of a fiber laser
• Reduction in cutting variables or tribal knowledge
• Fiber Laser is extremely efficient, equates to very low power consumption
• Low cost of operation, energy cost reduced, no laser gases requied to produce beam
• High cutting flexibility (Steel, Stainless Steel, Brass, Copper, Titanium, Aluminum, and more)
• Laser beam transmitted through a fiber optic.cable rather than with mirrors and channel tubing resulting in negligible power loss.
Model
UT-1325
UT-1530
Option
Max Cutting Range
1300*2500mm
1500*3000mm
According to
Demands
Machine Size(L*W*H)
2.4*4.7*1.9m
2.4*5.7*1.9m
Accessory Parts(L*W*H)
Chitler 1*1*1.2m Control Box 1*0.8*1.8m
Fiber Module 0.5*0.6*0.14m
Laser Medium
Single Core Junction Semiconductor Module
Max Cutting Speed
25m/min
Cooling Way
Water Cooling
Laser Power
500W(Option 750W/1000W/2000W)
Min Line Width
0.1mm
Cutting Depth
0.2-6mm
Driving and Transmission Way
Imported Servo Motor and Linear Guide Rail
Power Requirements
380V/50Hz/16A
Continuous Working Time
24Hours
Related Weight
Machine Body 2732kg Trolley 116kg
Computer Cabinet 56kg Servo Cabinet 75kg
Transformer 77kg Chiller 93kg Fiber Module 50kg
Fiber Laser Cutting Machine Applicable Target Customers
» This series fiber laser cutting machine is suitable for the customers who need to process plenty of thin metal sheet and high reflective metal materials.
Fiber Laser Cutting Machine Applicable material
» Specially for carbon steel, stainless steel, alloy, aluminum, galvanized steel, titanium, brass, copper and other metal sheets.
Fiber Laser Cutting Machine Applicable Industry
» Sheet metal working, hardware, kitchenware, electronic, automotive parts, advertising sign, furniture, lighting, decoration, jewelry, etc.
Fiber Laser Cutting Machine
Fiber Laser Cutting Machine,Metal Fiber Laser Cutting Machine,Fiber Co2 Laser Cutting Machine,Automatic Fiber Laser Cutting Machine
Shandong U-May CNC Technology Co., Ltd. , https://www.fiberlasers.de