The working status of the filling machine is also called the filling method. Due to the different properties of the liquid materials, the filling methods are various. According to the different filling pressure can be divided into normal pressure filling, pressure filling, equal pressure filling, negative pressure filling and so on. Atmospheric filling and weighing force filling, that is, under normal pressure, using the liquid's own gravity to pour it into the packaging container, and the entire system is working in the open state. This filling method is the most primitive filling method. .
It is still used in fluid filling machines that are very fluid. This method is suitable for use in liquids that are fluid, gas-free, and not volatile. Such as mineral water, white wine, soy sauce, milk and so on.
Filling machine is mainly a kind of product in packaging machinery. From the angle of packaging of materials, it can be divided into liquid filling machine, paste filling machine and powder filling machine. Provides great convenience for production, can be arbitrarily controlled filling capacity, supporting pneumatic capping or capping device. It can be equipped with electromagnetic valve induction sealing device to form a multi-station machine multi-energy production line. Small packaging production line set machine, electricity, gas in one, unique design, full-featured, stable performance, high quality, beautiful appearance. Filling nozzles have a slanting type or straight flushing type to suit different liquid filling types. The slanting type is suitable for foaming liquid materials. The positioning mode of the filling nozzles is plug-in type or vacant type to adapt to different irrigations. High-end products.
When adjusting the machine, the tools must be used properly. Do not use excessive tools or excessive force to remove the parts so as not to damage the parts or affect the machine performance. The filling machine must be kept clean. It is forbidden to have oil, liquid or glass chips on the machine to avoid machine damage. After the machine is unpacked, check whether the random technical data is complete and whether the machine is damaged during transportation so that it can be resolved in time. Install and adjust the feed assembly and discharge assembly as shown in the illustrations in this manual. Lubricate each lubrication point with new lubricant. Check if the machine is running in the correct direction. The machine must be grounded. External pressures include mechanical pressure, air pressure, and hydraulic pressure.
Fillers have different requirements for filling species under different filling methods. Therefore, when selecting filling equipments, we must not only pay attention to the technical requirements of filling machines, but also the filling methods to their own products. Otherwise, it is not necessarily the best filling machine. It is only the filling equipment that suits your product.
CNC turning is mainly used to process workpieces of revolving bodies, but sometimes it is also possible to clamp workpieces by customizing fixtures to process non-revolving products, such as planes, grooves, etc. Compared with manual turning and automatic turning, CNC turning has the characteristics of high efficiency and high precision. Moreover, with the development of science and technology, the requirements for workpieces are getting higher and higher, and more complex and higher precision workpieces need to be processed. In order to deal with such workpieces, multi-axis linkage CNC lathes have appeared, and multi-axis linkage turning machining usage is becoming more and more common.
SCZY has multiple three-axis CNC lathes, as well as multiple 4-axis linkage and 5-axis linkage CNC lathes, we can process complex-shaped rotating parts, usually the tolerance can reach ±0.01mm (specifically, it depends on the product material and structure. ), if we need better precision requirements, we can cooperate with the grinding machine for finishing, which can achieve a high precision of ±0.002mm. Our processing range includes the processing of stainless steel, alloy steel, special steel, ordinary steel, aluminum, copper, plastic and so on. Here are some CNC turning products we have processed:
CNC Turning Services, CNC Turned Parts, CNC Turning Machining, Precision Turing Parts, CNC Turning
Shenzhen SCZY Technology Co.,Ltd , https://www.szsccasting.com