Many plasma cuts are ionized by a high velocity gas stream ejected at a nozzle at a high temperature to form an electrical conductor. When a large current is passed, the conducting gas stream forms a high-temperature plasma arc, the heat of the arc locally melting (and evaporating) the metal at the workpiece slit, and a method of removing the molten metal by the power of the high-speed plasma gas stream to form a slit. The elongated and stable plasma arc formed by the annular airflow technique ensures that any conductive metal can be cut smoothly and economically.
The ion arc energy intensity of a fine plasma is three times that of a conventional plasma system. Combined with an improved torch, fine plasma gives the user nearly vertical edge cutting and the ability to cut complex shapes. Although limited by plasma arc slitting and fluency, fine plasma cutting is not as precise as laser, but there is no absolute advantage in laser cutting for many types of parts, and the cost of fine plasma cutting systems is much lower. The cost of a laser cutting system.
Many of the latest 260 amp fine plasma system sheet metal cutting speeds are close to the cutting speed of a 400 amp conventional plasma system. From thin metal sheets to 32mm thick metal sheets, the fine plasma cutting system achieves slag-free cutting. It is suitable for bevel cutting up to a 45 degree angle and can be cut underwater. While improving the cutting quality and cutting speed, the service life of plasma consumables has also been significantly improved. According to the customer feedback from Farley, a set of consumables can complete more than 3,000 cutting tasks.
Many plasma cuttings cut all sheet metal and many non-metallic materials with a maximum cutting speed of 10m/min, which is 10 times that of flame cutting. Underwater cutting can eliminate noise, dust, harmful gases and arcs generated during cutting, which is conducive to environmental protection.
Plasma cutting is especially suitable for medium and thick boring processing, such as shipbuilding, metallurgy, boiler containers, petroleum pipes and other industries.
As a leading enterprise in the galvanized & pre-painted industry in china. Shandong Xinghan Materail Corporation with an annual output of 1 million tons of picking coils. 1 million tons of cold roll. 800,000 tons of hot-dipped galvanized and galvalume steel sheets. 450,000 tons of thicker galvanized steeel sheets.300,000 tons of pre-painted steel sheets. occupies a stable leading position in the industry.
The company has 2 PPGI/PPGL production lines, taking GI or aluzinc sheet as its base material. adopt advanced painting technology, Main thickness rang is 0.15mm to 1.0mm and width 750 to 1250mm.
Prepainted Galvalume Steel Coil
Ppgi And Ppgl,Pre Painted Steel Sheet,Prepainted Galvalume Coil,Prepainted Galvalume Steel Coil
SHANDONG XINGHAN MATERIAL CORPORATION , https://www.xinghansteel.com