WQAS/WQBS submersible sewage grinder pumps are designed with a grinder system which grinders solids into small pieces so that they can be led away through pipes of a relatively small diameter.
Application and Installation
1.Pumps are designed for domestic/commercial/industrial use.Â
2.waste water with discharge from water closets.
3.Sewage from restaurants, hotels,camping sites,etc. The compact design makes the pump suitable for both temporary and permanent installation, the pump can be installed on an auto-coupling system or stand freely on the bottom of the pit.
4.WQAS/WQBS impeller is equipped with an open impeller.
Â
Operating Limits
1. Trans medium's PH: 6-8.5
2. Fluid temperature limit: <40 °C
3. Max ambient temperature: <40 °C
4. Operating depth: <5m
5.  Pump working position: More than 0.5m over the bottom, should not be inserted into sludge.
Materials
Motor housing:  Cast iron
Impeller: Cast iron
Motor wire: CopperÂ
Mechanical seal: Alloy double side
Shaft:Â SS420
Cutter: 440 C
Bearing:Â NSK
Motor
1. 2-pole induction motor
2.1Â phase,50hz/60hz
3. Insulation Class: BÂ
4. Protection: IP68
Model Instruction
WQAS(D)7-12-0.9
0.9: Rate power(kw)
12: Rated head(m)
7: Rated flow(m3/h)
WQAS/WQBS: Model code, and no "D" means three-phase
Technical Data
Â
 Model | Voltage (v) | Power (kw) | Flow (m3/h) | Head (m) | Outlet Diameter (mm) |
WQASD7-12-0.9 | 220 | 0.9 | 7 | 12 | 40 |
WQASD7-16-1.2 | 1.2 | Â | 16 | ||
WQAS7-12-0.9 | 380 | 0.9 | Â | 12 | |
WQAS7-16-1.2 | 1.2 | Â | 16 | ||
WQAS7-21-1.5 | 1.5 | Â | 21 | ||
WQAS7-26-2.6 | 2.6 | Â | 26 | ||
WQ8-31-3.1 | 3.1 | 8 | 31 | ||
WQ10-38-4 | 4 | 10 | 38 | ||
WQBS7-15-1.1 | 1.1 | 7 | 15 | 50 | |
WQBS15-14-1.5 | 1.5 | 15 | 14 | ||
WQBS15-20-2.2 | 2.2 | 15 | 20 | ||
WQBS25-10-2.2 | 2.2 | 25 | 10 | 65 | |
WQBS15-24-3 | 3 | 15 | 24 | 50 | |
WQBS25-15-3 | 3 | 25 | 15 | 65 | |
WQBS15-30-4 | 4 | 15 | 30 | 50 | |
WQBS30-22-4 | 4 | 30 | 22 | 80 | |
WQBS30-28-5.5 | 5.5 | 30 | 28 | ||
WQBS50-15-5.5 | 5.5 | 50 | 15 | 100 | |
WQBS70-18-7.5 | 7.5 | 70 | 18 | 150 |
Â
Voltage 220V~380V fluctuation for 10% more
Â
 WQAS/WQBS submersible sewage grinder pumps are designed with a grinder system which grinders solids into small pieces so that they can be led away through pipes of a relatively small diameter.
Application and Installation
1.Pumps are designed for domestic/commercial/industrial use.Â
2.waste water with discharge from water closets.
3.Sewage from restaurants, hotels,camping sites,etc. The compact design makes the pump suitable for both temporary and permanent installation, the pump can be installed on an auto-coupling system or stand freely on the bottom of the pit.
4.WQAS/WQBS impeller is equipped with an open impeller.
Â
Operating Limits
1. Trans medium's PH: 6-8.5
2. Fluid temperature limit: <40 °C
3. Max ambient temperature: <40 °C
4. Operating depth: <5m
5.  Pump working position: More than 0.5m over the bottom, should not be inserted into sludge.
Materials
Motor housing:  Cast iron
Impeller: Cast iron
Motor wire: CopperÂ
Mechanical seal: Alloy double side
Shaft:Â SS420
Cutter: 440 C
Bearing:Â NSK
Motor
1. 2-pole induction motor
2.1Â phase,50hz/60hz
3. Insulation Class: BÂ
4. Protection: IP68
Model Instruction
WQAS(D)7-12-0.9
0.9: Rate power(kw)
12: Rated head(m)
7: Rated flow(m3/h)
WQAS/WQBS: Model code, and no "D" means three-phase
Technical Data
Â
 Model | Voltage (v) | Power (kw) | Flow (m3/h) | Head (m) | Outlet Diameter (mm) |
WQASD7-12-0.9 | 220 | 0.9 | 7 | 12 | 40 |
WQASD7-16-1.2 | 1.2 | Â | 16 | ||
WQAS7-12-0.9 | 380 | 0.9 | Â | 12 | |
WQAS7-16-1.2 | 1.2 | Â | 16 | ||
WQAS7-21-1.5 | 1.5 | Â | 21 | ||
WQAS7-26-2.6 | 2.6 | Â | 26 | ||
WQ8-31-3.1 | 3.1 | 8 | 31 | ||
WQ10-38-4 | 4 | 10 | 38 | ||
WQBS7-15-1.1 | 1.1 | 7 | 15 | 50 | |
WQBS15-14-1.5 | 1.5 | 15 | 14 | ||
WQBS15-20-2.2 | 2.2 | 15 | 20 | ||
WQBS25-10-2.2 | 2.2 | 25 | 10 | 65 | |
WQBS15-24-3 | 3 | 15 | 24 | 50 | |
WQBS25-15-3 | 3 | 25 | 15 | 65 | |
WQBS15-30-4 | 4 | 15 | 30 | 50 | |
WQBS30-22-4 | 4 | 30 | 22 | 80 | |
WQBS30-28-5.5 | 5.5 | 30 | 28 | ||
WQBS50-15-5.5 | 5.5 | 50 | 15 | 100 | |
WQBS70-18-7.5 | 7.5 | 70 | 18 | 150 |
Â
Voltage 220V~380V fluctuation for 10% more
Â
Nitrogen Analyzer is an important Nitrogen Generator parts. This analyzer is used to test and display the purity of produced nitrogen. It is widely used in many industrial applications.
Nitrogen Analyzer Technical Specifications
Monitor: Five-digital dynamic LED monitor, visible display window: 90mm×25mm
Measure Range: 10~2000ppm, 0~2%, 0~21% O2
Sensor Principle: Ion current oxygen sensor
Measure Mode: Air inflowing or convection diffusing
Sample Gas Flow: 150300ml/mim
Accuracy: ±5% in 10~2000ppm O2 range; ±2% in 0~2O2 range; ±1% in 0~21O2 range
Response Time: 90% of FS reading ≤20 seconds
Ambient Temp.: -10~+50
Ambient Humidity: <80RH
Stability: <±1%.FS (168h)
Signal Output: 4~20mA
Power Supply:220±10% VAC, 50/60Hz, the power loss ≤6VA
Sensor Life: 20000 hours at 25 and 1 atm
Warranty:12 months analyzer; 12 months sensor
Weight: 1kg
Appearance Dimension:160mm×80mm×176mm (W×H×D)
Opening Size: 151mm×75mm
Nitrogen Analyzer
Nitrogen Analyzer,Nitrogen Gas Analyzer,Online Nitrogen Gas Analyzer,Portable Nitrogen Gas Analyzer
Shandong Gamma Gas Engineering Co. Ltd. , http://www.gammagas.com