The installation of the pedestrian access gate is a professional and serious matter, and the accuracy of the installation is related to the safety and stability of the use. For the installation of the gates, it involves the installation of different models such as intelligent three-roll gates, swing gates, wing gates, etc. Today, Beijing Xi Mo Luo Xiaobian is briefly summarized from the installation of intelligent three-roll gates:
1. Understand the channel gate specifications
The installation of the gate first determines the specifications of the vertical three-roller gate or the bridge three-roller gate, that is, the size of the intelligent three-roller gate, the power size and the power of the access controller and the material of the channel gate movement, and according to the design , determine the number of channels.
2. Channel gate installation and implementation
Understand the installation dimensions of single-channel and dual-channel and multi-channel. Because each intelligent three-roller gate has four fixed points in the bottom plate, it is fixed with the M12 expansion screw and the ground. Therefore, the outlet of the three-roll gate should be reserved in three. At the two ends of the roller shutter chassis, when the pipeline is strong or weak, the dedicated pipeline must be reserved separately. It is recommended to use 25 tubes. 
Note: The three-roller gate needs to be equipped with a leakage protector. The total length of a single cable to the server should not exceed 80 meters. The intelligent three-roll gate control system is generally a set of channels to install a two-door controller with two read heads to achieve access. If you add other networked authentication devices, you need to increase the corresponding number of network cables to the server. Reserve two meters after all the wires are out of the ground.
3. Intelligent three-roll gate side elevation
Machinery And Equipment Parts,Metal Pipe Clips,Metal Tube Clamp,Clamp Metal
Ningbo Metal Sharing Supply Chain Management Co., Ltd , https://www.metalsharing.com