Manufacturer Specializing in The Production of Wood Shredders Waste Wood Crusher

Manufacturer specializing in the production of wood shredders waste wood crusher 

The Single Shaft Shredder Machine is mainly used to crush wood, rubber, plastic, paper and other waste materials. It is suitable for waste recycling in various industries. According to per customer's requirements, such as the input size of the material, capacity and the final output size etc, we can work out a suitable proposal for our customers. After being shredded by the single shaft shredder machine, the output material could be used directly or go into the step of size reduction. This machine has the characteristics of low speed and low noise.

Features of production:
1The Single Shaft Shredder is capable of recycling large quantity intractable material efficiently, such as wood,large hard & solid materials (waste lumps from extruder),plastic containers,bucket,plastic pipes,film,fiber,paper,etc. 
2It is with below advantages:firm design,low noise,low power consumption,and continue working for a long time. 
3The output scraps size can be adjusted to minimum 16mm(Through adjusting the screen),and also no need the screen if there is no size requirements on output scraps. 
4The shaft of knife rotates under low speed. 
5.This machine controlled by PLC,to control the loop selective(if overload,rotors will revers to avoid feeing blocked).
Advantages of Strong single shaft shredder / plastic shredding machine for sale


1. The machine is suitable to treat the big size of plastic product ,such as big diameter plastic pipe ,pressing plastic film and others.
2. The blade base and blade on the rotary roller can be disassembly .it is easy to clean and maintenance.
3. The rotary blade adopt the V design, It can decrease the noise and decrease energy consumption.
4. Each rotary blade with 4 cutting knife edge, when the rotary blade is wear, it can be rotated to 90 degree, then the blade can continues use.
5. Each fixed blade with 2 cutting knife edge, when the fixed blade is wear, it can be rotated to 180 degree, then the blade can continues use.
6. The main axis is drive by gearbox, its running very stably, low noise and strong power.
7. The material push feeding system is hydraulic ways , ,its running very stably.
  According to different blades, the single shaft shredder can rush kinds of waste materials, such as wood sheets, plastic, paper, pp/pe films and etc. Please see the following blades.











  Manufacturer specializing in the production of wood shredders waste wood crusher 

The Single Shaft Shredder Machine is mainly used to crush wood, rubber, plastic, paper and other waste materials. It is suitable for waste recycling in various industries. According to per customer's requirements, such as the input size of the material, capacity and the final output size etc, we can work out a suitable proposal for our customers. After being shredded by the single shaft shredder machine, the output material could be used directly or go into the step of size reduction. This machine has the characteristics of low speed and low noise.

Features of production:
1The Single Shaft Shredder is capable of recycling large quantity intractable material efficiently, such as wood,large hard & solid materials (waste lumps from extruder),plastic containers,bucket,plastic pipes,film,fiber,paper,etc. 
2It is with below advantages:firm design,low noise,low power consumption,and continue working for a long time. 
3The output scraps size can be adjusted to minimum 16mm(Through adjusting the screen),and also no need the screen if there is no size requirements on output scraps. 
4The shaft of knife rotates under low speed. 
5.This machine controlled by PLC,to control the loop selective(if overload,rotors will revers to avoid feeing blocked).
Advantages of Strong single shaft shredder / plastic shredding machine for sale


1. The machine is suitable to treat the big size of plastic product ,such as big diameter plastic pipe ,pressing plastic film and others.
2. The blade base and blade on the rotary roller can be disassembly .it is easy to clean and maintenance.
3. The rotary blade adopt the V design, It can decrease the noise and decrease energy consumption.
4. Each rotary blade with 4 cutting knife edge, when the rotary blade is wear, it can be rotated to 90 degree, then the blade can continues use.
5. Each fixed blade with 2 cutting knife edge, when the fixed blade is wear, it can be rotated to 180 degree, then the blade can continues use.
6. The main axis is drive by gearbox, its running very stably, low noise and strong power.
7. The material push feeding system is hydraulic ways , ,its running very stably.
  According to different blades, the single shaft shredder can rush kinds of waste materials, such as wood sheets, plastic, paper, pp/pe films and etc. Please see the following blades.











 

Molybdenum Carbide Welding Wire

We offer welding wires for low, medium and high alloy hardfacing, for mild steel fabrications, Diameters range from 1.2 mm to 4.0 mm, using our own manufacturing technology. In addition to cored wires, our range of consumables includes tubular welding electrodes.

HP Welding manufactures an extensive range of flux cored and metal cored hardfacing consumables. We offer welding wires for low, medium and high alloy hardfacing, which provide the ultimate protection against various types of wear, including abrasion, erosion, impact, mechanical fatigue, and more.

Our range of hardfacing welding wires dedicated to increasing abrasion resistance. Flux cored wires and metal cored wires suitable for increasing wear resistance of parts such as screw conveyors, fans, equipment used in agriculture & mining, grinding mills, vertical mills, screws, blades, ventilators and more.

HP Welding manufactures a range of flux cored Welding Wire and metal cored welding wire for different cladding applications to increase wear resistance. With our cladding wires, you will prevent wear problems from abrasion, impact, temperature, corrosion and increase the service life of your parts.

HP Welding wire has wide field of application: buffer layer before hardfacing, assembly of wear plates and armouring, and of manganese steels

HP Welding wire is of non-magnetic deposit strongly resistant to impact and high pressure, highly resistant to cracking - austenitic structure that work-hardens strongly

HP Welding wire is good material for rebuilding, buffer layers and assembly of manganese steels

HP Flux Cored Wire Spec data, Chemicals and Applications

Item	Chemicals								Hardness (HRc)	Application
	C	Si	Mn	Cr	Mo	B	Others	Fe
HP-280Mo	4.5	0.8	0.6	28	1			Balance	58~62	Coal Mill; Vertical Mill
HP-280	4.5	0.8	0.6	28			Ni:0.15	Balance	58~62
HP-252B	5	0.8	0.6	25		0.38		Balance	58~62	Wear Plate
HP-252B+	5	0.8	0.6	25		0.7		Balance	59~64	Wear Plate
HP-1996	0.08	0.8	6.5	19.8			Ni:9	Balance	HB180-220	Buffer layer
HP-250	0.11	0.5	1.5	1.1	0.25			Balance	24-32	Welding Recondition Backing weld
HP-265	5	0.7	0.5	22			Nb:7	Balance	61-64	Slag Mill; Hardfacing Enhancement Layer

Molybdenum Carbide Welding Wire,Stainless Steel Flux Core Welding Wire,Stoody Flux Cored Welding Wire,Premium Hardfacing Welding Wire

HuiFeng Wear Resistant Group , https://www.hpwearsolution.com