New Hot Sales Combustion Chamber Foam Cleaning Agent with MSDS

COMBUSTION CHAMBER FOAM CLEANING AGENT 

Features:
Carburetor cleaner can clean the inside and outside dirt,pectin and carbon of carburetor.It also can used for cleaning all mechanical parts, can use in industrial areas.
Directions:
1.Remove the assorted extension tube,insert in the nozzle orifice,align to the clean parts then press nozzle.
2.Cleaning carburetor:open the air filter firstly,remove the filter air paper core.Start the engine and increase the throttle to maintain speed up to 5000 rpm or more.Spray this product to carburetor.clean the dirt and carbon in carburetor then exhaust from the vent-pipe.

Precaution:
Keep out of reach of children.
Keep the can upright,the horizontal angle should not less than 45 °when used.
Construction in the air circulated place,the cleaning effect will be better.If splashed into eyes,wash with clean water immediately,then seek medical advice.
Flammable,store in a place with temprature below 40ºC.Do not store in the car.
Keep away from heat and open flame,no exposure,puncture or incinerate cans.
The net and gross weight will be changed with time. It's normal for aerosol product.wastage rate is not more than 2% yearly.

About Us
Tonyin Group was founded in 2007. The factory locate in Guangzhou.
1. Technology and equipment
Brings in Britain KP system, Italian COSTER system, Switzerland PAMASOL system, and series of professional automatic aerosol created system. Tonyin group adhere to the philosophy of "Green environmental protection, High aspirations of success; Scientific and technical innovation, Unity is strength".
2. Certificate
It havs passed the identification of "ISO9001:2008 quality system", "ISO14001 environment system certificate", "Safe Production license of the dangerous chemicals" and "OHSAS18001 occupational,health and safety management system certificate". Auto Parts products have obtained CCC, DOT, ECE and GCC certifications etc. , and Car Care & Maintenance and Home Care products have passed SGS laboratory testing and achieved international qualieautifying and maintenance, car air treatment, fuel system conservation anty standards.
3. Products line
We have more than 120 kinds, 10 series of car detailing & cleaner products, for Glass, Tyres & Wheels, Paint, Cooling system, Engine, Air conditioner, Chassis, and Oil. for example: Headlight Restore, Windshield Washer Solvent, Wax, Spray Wax, Nano Chrome Paint, Nano Ceramic Coating, Tyre Sealent, Tyre & Wheel Cleaner, Leather Coating, Tyre Shine, Hand Soap, R134A, Wash & Wax (Shampoo), Carbon Cleaner, Lubricant, Gasoline Treatment, Injector Cleaner, Octance Booster, Brake & Parts Cleaner, Brake Fluid DOT-4, ATF Oil.....etc.
Due to the professional R & D team , the compnay continually keep launching new products and take the initiative in the markets.

Factory tour


Exhibition

 
 

COMBUSTION CHAMBER FOAM CLEANING AGENT 

Features:
Carburetor cleaner can clean the inside and outside dirt,pectin and carbon of carburetor.It also can used for cleaning all mechanical parts, can use in industrial areas.
Directions:
1.Remove the assorted extension tube,insert in the nozzle orifice,align to the clean parts then press nozzle.
2.Cleaning carburetor:open the air filter firstly,remove the filter air paper core.Start the engine and increase the throttle to maintain speed up to 5000 rpm or more.Spray this product to carburetor.clean the dirt and carbon in carburetor then exhaust from the vent-pipe.

Precaution:
Keep out of reach of children.
Keep the can upright,the horizontal angle should not less than 45 °when used.
Construction in the air circulated place,the cleaning effect will be better.If splashed into eyes,wash with clean water immediately,then seek medical advice.
Flammable,store in a place with temprature below 40ºC.Do not store in the car.
Keep away from heat and open flame,no exposure,puncture or incinerate cans.
The net and gross weight will be changed with time. It's normal for aerosol product.wastage rate is not more than 2% yearly.

About Us
Tonyin Group was founded in 2007. The factory locate in Guangzhou.
1. Technology and equipment
Brings in Britain KP system, Italian COSTER system, Switzerland PAMASOL system, and series of professional automatic aerosol created system. Tonyin group adhere to the philosophy of "Green environmental protection, High aspirations of success; Scientific and technical innovation, Unity is strength".
2. Certificate
It havs passed the identification of "ISO9001:2008 quality system", "ISO14001 environment system certificate", "Safe Production license of the dangerous chemicals" and "OHSAS18001 occupational,health and safety management system certificate". Auto Parts products have obtained CCC, DOT, ECE and GCC certifications etc. , and Car Care & Maintenance and Home Care products have passed SGS laboratory testing and achieved international qualieautifying and maintenance, car air treatment, fuel system conservation anty standards.
3. Products line
We have more than 120 kinds, 10 series of car detailing & cleaner products, for Glass, Tyres & Wheels, Paint, Cooling system, Engine, Air conditioner, Chassis, and Oil. for example: Headlight Restore, Windshield Washer Solvent, Wax, Spray Wax, Nano Chrome Paint, Nano Ceramic Coating, Tyre Sealent, Tyre & Wheel Cleaner, Leather Coating, Tyre Shine, Hand Soap, R134A, Wash & Wax (Shampoo), Carbon Cleaner, Lubricant, Gasoline Treatment, Injector Cleaner, Octance Booster, Brake & Parts Cleaner, Brake Fluid DOT-4, ATF Oil.....etc.
Due to the professional R & D team , the compnay continually keep launching new products and take the initiative in the markets.

Factory tour


Exhibition

 
 

Double Spindle Turning Milling Composite Machine Tool

Double spindle butt lathe is an advanced CNC lathe with high in the machine tool industry. Its main feature is that it can achieve multiple types of turning and drilling processing on one machine tool, improving productivity and machining accuracy.

I. Structure composition

The main structural composition of double spindle docking lathe includes machine body, CNC system, tool holder, toolholder, spindle, collet, turning center, tool, etc. Among them, the machine tool body is the foundation of the whole lathe, mainly responsible for supporting and fixing each component to ensure the stability of the machine tool. The CNC control system is the intelligent brain of the lathe, which centrally controls and manages the operation and machining process of the lathe. The tool holder and tool shank are used to hold and fix the tool and cut the workpiece. The spindle and collet are the core parts of the lathe, which are responsible for driving the workpiece and cutting tools, etc. for machining.

II. Working Principle

The working principle of double spindle docking lathe is similar to that of ordinary lathe, but it has double spindle structure. Its spindles can run together or work independently to process two workpieces at the same time, thus realizing multiple tasks on one machine tool. This lathe adopts advanced CNC technology, which can freely adjust the processing parameters as needed and highly automate its working process.

III. Application Scenario

The twin-spindle docking lathe is widely used in the processing of various materials such as metals and non-metals in the industrial field. Its main application scenarios include:
(1) Aerospace field: manufacturing various aerospace engines, accessories and parts.
(2)Automobile manufacturing industry: used to produce various cars, trucks and motor vehicle parts.
(3) Medical devices: for the production of various medical devices and medical equipment.
(4) Electronics field: for the production of a variety of electronic product housings and parts.
(5) Machinery field: for the production of various machinery, industrial equipment and parts.

In a word, double spindle butt lathe is a kind of advanced CNC lathe that is standardized, modularized and equipped with advanced mechanical, electrical, hydraulic, pneumatic and computer control technologies. Its high efficiency, high precision and high automation make it have great advantages in terms of return on investment, production efficiency and product quality.

Double Spindle Turning Milling Composite Machine Tool,Dual Spindle Cnc,Dual Spindle Lathe,Dual Spindle Cnc Lathe

Ningbo Yien Machinery Co., Ltd , https://www.yienmachinery.com