Â
Equipment list:
| NO. | NAME | MODEL | QTY |
| 1 | Semi-automatic PET bottle blow molding machine (one oven+two blowers) |
BM-8Y | 1set |
| 2 | Blowing mold | 100ml-2L | 1set |
| 3 | HP Air Compressor | 1.2m3/min 30Kg | 1set |
| 4 | Air dryer | 2.0Â m3/min 30Kg | 1set |
| 5 | Air filter | 2.0m3/min 30kg | 2sets |
| 6 | Water chiller | 3HP | 1pc |
Seal cushion(10pcs);Lamps(5pcs);Fuse(3pcs);Switch(1pcs);breaker(1pcs);Silicon controlled (1pcs)
pressure adjust (1pc)
Â
Features:
· Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
· The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
· The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
· The machine can be operated in the step-by-step mode and the semi-auto mode.
· The machine is small with low investment, easy and safe to operate.
| Model | BM-8Y | |
| Container | Product material | PET |
| Volume | 0.1L-2L | |
| Theoretical output | 1200-1500PCS/H | |
| Max. product diameter | 180mm | |
| Max. product height | 300mm | |
| Molding | Max. mold plate Dimension(L x W) | 390x345mm |
| Die force | 100KN | |
| Die stroke | 270 | |
| Max. pulling stroke | 400 | |
| Blow pressure | 1.2-2.8Mpa | |
| Operation pressure | 0.8Mpa | |
| Machine size and weight | Machine size(LxWxH)(m) | 1.46x0.58x1.8m |
| Machine weight(KG) | 650KG | |
| Heater (L x W x H) | 1.35x0.55x1.15m | |
| Heater weight | 350Kg | |
| Power | 17.5kw | |
| Air compressor | Unit | 1.2M3/min 30KG |
| Volume | M3 | 1.2 |
| Pressure | Kg | 30 |
| Speed | r/min | 850 |
| Power | KW | 15 |
| Overall Dimension | mm | 2000*1100*1600 |
| Weight | kg | 620 |
Air Filter:
| Refining-Filter | Unit | 1.0M3/30Kg |
| Flow Capacity | M3/Min | 1 |
| Max. work pressure | Mpa | 3.0 |
| Inlet Temp. | ºC | ≤50 |
| Cold Medium | mm | 650*250*250 |
| Weight | Kg | 15 |
Air dryer:
Â
| Refrigeration Air Dryer | Unit | 2.0M3/min 3.0Mpa |
| Flow capacity | Nm3/min | 2.0 |
| W.P | Mpa | 3.0 |
| Inlet Temp. | ºC | ≤80 |
| Dew point | ºC | 23 |
| Ambient Temp. | ºC | ≤38 |
| Power supply | V/HZ | 220/50 |
| Compressor power | Kw | 0.75 |
| Cold Medium | mm | 1050×650×1100 |
| Weight | Kg | 120 |
water chiller:
| Model | 03WCI | |
| 4.4/38ºC Cooling capacity(Kcal/h) | 7188 | |
| Compressor | All-closed vorticity | |
| Compressor power (KW) | 2.5 | |
| Refrigerant | R22 | |
| Chilled water pump power(KW) | 0.75 | |
| 10ºC Max. flow rate of chilled water(L/min) | 55 | |
| Flow water inlet and outlet pipe | 1'' | |
| Condensing water rate L/min | ≥36 | |
| Chilled water inlet and outlet pipe | 1'' | |
| Exterior dimension | Length(mm) | 1000 |
| Width(mm) | 600 | |
| Height(mm) | 1180 | |
| Water tank capacity | L | 50 |
| Weight | Kg | 150 |
Stainless Steel Wire Mesh Accessories
Wire Mesh Filter Disc produced by stamping process,it is the main product for filtration equipment. Can be edge, spot welding treatment, make it into stainless steel edge filter, stainless steel spot welding filter, can be used single, double, multi-layer stainless steel mesh processing.
Filter mesh material is divided into: Stainless Steel Wire Mesh, silk cloth, copper wire mesh, stainless steel woven wire mesh, black silk cloth, galvanized wire mesh and other metals and so on.
Mesh diameter: 2 mm to 2000 mm.
Type: single layer, multi-layer; According to the shape is divided into round, rectangular, waist shape, oval and other uses: used in rubber, plastic industry, grain and oil screening, etc. Our company can supply all kinds of filter pieces, including single layer, multi-layer. Multi-layer mesh has double layer, three layer, or as required processing. At the same time can also process a variety of materials and sizes of rectangular, Plain Weave Wire Mesh .
According to the shape: rectangular filter, circular filter, annular filter, distance filter, waist filter, oval filter, fan filter.
According to the number of layers: single layer filter, double layer filter, three layer filter, four layer filter, five layer filter, multi-layer filter.
Custom size: 5mm ~ 1000 mm. (can be customized processing).
Application industry: widely used in "chemical fiber spinning, ultrafine fiber, leather, non-woven fabric, color masterbatch, plastic, PVC granulation, sheet extrusion, rubber, carbon fiber" melt filtration.
Stainless steel filter mesh characteristics: stamping machinery through the mold stamping, shape of round, square, rectangular, oval, bowl, cap, shaped, etc.
The product has the characteristics of standard size, good filtration accuracy and easy to use.
Application: widely used in chemical fiber industry spinneret, rubber, pharmaceutical, brewing, beverage and filtration machinery industry filtration.
The woven wire mesh products we can also supply Wire Mesh Filter Tube, Wire Mesh Filter Cap and widely used in chemical ,petroleum,water treatment and other industries .
stainless steel wire mesh,woven wire mesh filter disc ,metal mesh filter tube
Suzhou Haoxiang Screen Stencil Products Co.,Ltd , https://www.haoxiangwiremesh.com