Protective Coating Auto Chassis Armor for Chassis Coating

CAR CHASSIS PROTECTIVE COATING

Features:
Tough black coating for vehicle, under-body protection. Protects against stone chips, rust and salt corrosion, Wildly used around automotive chassis and industry filed.

Directions:

1. Keep the place where need to spray dry, clean, no oil blot and film, and covering the place where no need to spray.
2. Shake before use and let ball inside can roll freely. Shake during working.
3. Try out on waste object.
4. Fully shake and spray on the object at a distance of 20-30cm. Spray thin film on the object repeatedly will be better then spray thick film on the object at one time.
5. Work in the temperature between21ºC to 32C ºCcan get the best effect, places where be sprayed by mistake can be cleaned by rag with water or volatile liquid.
6. If a mount of content can't be sprayed out before it almost be used up, you can press the spray nozzle,upside down the can and spray 2-3 seconds.
7. After use, clean the spray nozzle ,upside down it and spray till clean air can be found.
8. This product can get dry about 4-6 hours after use, and the exact time will depend on temperature.

Precaution:
Don't puncture and burn the can.
Don't use it near the flame ,forbid long time exposure to sunlight,  storage in high temperate (above 49ºC).
Avoid contact with eyes, skin and clothing.Do not swallow it.
Use it in well-ventilated area.if find it's hard to breath during using,please stop and be away to breath fresh air. if no remission please see doctor immediately.
If eyes contacted,rinse with water at least 15 minutes and go to the hospital immediately.if skin contact, wash it by water.
Keep out of the reach of children.
After using, spray paint on the surface to get more beautiful.
Should not be used on the catalytic converter, exhaust system, engine, rotating shaft and other extremely high temperature parts.
No long time storage in the boot of the car .

About Us
Tonyin Group was founded in 2007. The factory is  located  in Guangzhou.


Factory Overview


Exhibition




Trancy
Marketing Manager
QINGDAO TONYIN INDUSTRIAL CO.,LTD
ADD: 11/D, Tianzhi Int'l Mansion, Free Trade Zone, Qingdao, Shandong Province,PRC.
SHENZHEN TONYIN TECHNOLOGY CO.,LTD
ADD: Room#5042,Yilan Ge,No.5 of Baolong Er Road,Longgang Street,Longgang District,Shenzhen,PRC.
Mob: +86 152 4429 1106
Website: www.tonyingroup.com
 

CAR CHASSIS PROTECTIVE COATING

Features:
Tough black coating for vehicle, under-body protection. Protects against stone chips, rust and salt corrosion, Wildly used around automotive chassis and industry filed.

Directions:

1. Keep the place where need to spray dry, clean, no oil blot and film, and covering the place where no need to spray.
2. Shake before use and let ball inside can roll freely. Shake during working.
3. Try out on waste object.
4. Fully shake and spray on the object at a distance of 20-30cm. Spray thin film on the object repeatedly will be better then spray thick film on the object at one time.
5. Work in the temperature between21ºC to 32C ºCcan get the best effect, places where be sprayed by mistake can be cleaned by rag with water or volatile liquid.
6. If a mount of content can't be sprayed out before it almost be used up, you can press the spray nozzle,upside down the can and spray 2-3 seconds.
7. After use, clean the spray nozzle ,upside down it and spray till clean air can be found.
8. This product can get dry about 4-6 hours after use, and the exact time will depend on temperature.

Precaution:
Don't puncture and burn the can.
Don't use it near the flame ,forbid long time exposure to sunlight,  storage in high temperate (above 49ºC).
Avoid contact with eyes, skin and clothing.Do not swallow it.
Use it in well-ventilated area.if find it's hard to breath during using,please stop and be away to breath fresh air. if no remission please see doctor immediately.
If eyes contacted,rinse with water at least 15 minutes and go to the hospital immediately.if skin contact, wash it by water.
Keep out of the reach of children.
After using, spray paint on the surface to get more beautiful.
Should not be used on the catalytic converter, exhaust system, engine, rotating shaft and other extremely high temperature parts.
No long time storage in the boot of the car .

About Us
Tonyin Group was founded in 2007. The factory is  located  in Guangzhou.


Factory Overview


Exhibition




Trancy
Marketing Manager
QINGDAO TONYIN INDUSTRIAL CO.,LTD
ADD: 11/D, Tianzhi Int'l Mansion, Free Trade Zone, Qingdao, Shandong Province,PRC.
SHENZHEN TONYIN TECHNOLOGY CO.,LTD
ADD: Room#5042,Yilan Ge,No.5 of Baolong Er Road,Longgang Street,Longgang District,Shenzhen,PRC.
Mob: +86 152 4429 1106
Website: www.tonyingroup.com
 

EVA Exercise Mat

EVA Exercise Mat is also a EVA gym amt, EVA fitness mat and EVA training mat, perfect for exercise areas like gym, workshops or kids play areas. Give yourself shock-absorbing comfort when doing yoga, Pilates, cross fit or weight lifting. Protect your little ones when they play, by assembling the mats into a virtual carpet to cover the play area floor. Can also be used in any room you might be standing for long periods like your kitchen or bathroom.

These mats are non-smell and non-toxic, easy to assemble and wipe clean with soap and water. We offer 2 different textures for our exercise mat, which is "T" texture and leaf texture.

The light-weight interlocking tiles each come with two straight edge pieces so you can assemble the mats in a rug-style look. Buy multiple packs to allow yourself the opportunity to mix and match colors, expand the size and personalize your design. Thanks to the puzzle piece edge design, when interlocked the mats stay firmly in place.

Eva Exercise Mat,Eva Gym Mat,Eva Fitness Mat,Jigsaw Gym Mat,Eva Play Mat,Eva Training Mat

Huizhou City Melors Plastic Products Co., Limited , https://www.evafoammaster.com