The technical point of the process is that the raw ore is scrubbed and added with water to form a slurry. After the negative pressure blasting, the impurities coexisting with the diatomaceous earth are separated. After the ultrasonic vibration is used to make the impurities in a moving state, after the invented diatomite ore special gravity water is added, static friction is generated under the rotation of the high speed separator. Using Fe 2 O 3, Al 2 O3 negatively charged particles, heavy alkali metal magnetic particles are positively charged in water, and diatomaceous amorphous SiO 2 composition remains neutral principle. The high-voltage static electricity generated by internal friction causes the impurities to not settle, and the diatoms are freely settled into diatom cake to achieve the purpose of separating diatoms from impurities. Thus, the medium and low grade diatomaceous earth is preferably a concentrate. 
Excavator pipe fittings and tube fittings are essential components in the hydraulic system of excavators. These fittings are used to connect hydraulic hoses and tubes to various components of the excavator, such as the hydraulic pump, cylinders, and valves.
There are various types of excavator pipe fittings and tube fittings, including:
1. Flanges: Flanges are used to connect two pipes or tubes together. They are usually bolted together and provide a leak-free seal.
2. Adapters: Adapters are used to connect two different types of fittings or components. They can be male or female, and can be used to connect hoses, tubes, or other components.
3. Elbows: Elbows are used to change the direction of a pipe or tube. They come in various angles, such as 45 degrees or 90 degrees.
4. Tees: Tees are used to connect three pipes or tubes together. They come in various configurations, such as equal tees or reducing tees.
5. Couplings: Couplings are used to connect two pipes or tubes together. They can be either rigid or flexible, and are often used in tight spaces where movement is limited.
Excavator pipe fittings and tube fittings are made from various materials, including steel, brass, and aluminum. The choice of material depends on the application and the environment in which the excavator is used. For example, steel fittings are often used in high-pressure applications, while brass fittings are used in low-pressure applications.
Overall, excavator pipe fittings and tube fittings are critical components in the hydraulic system of excavators. They ensure that hydraulic fluid flows smoothly and efficiently through the system, enabling the excavator to perform its tasks effectively.
Pipe Fittings ,Hydraulic Plumbing Fitting,Hydraulic Pipe Fitting,Hydraulic Tube Fitting
CATSU Hydraulic Machinery Equipment Co.,Ltd , https://www.cattiltrotator.com