Radiator Stop Leak Product

  • Model NO.: TE-8087
  • Validity Date: Three Years
  • Specification: CE, RoHS, SGS, GMP
  • Volume: 335ml
  • Trademark: TEKORO
  • Origin: Guangdong, China
Radiator system leak stopper is formulated with natural vegetable fiber, hardener, anti-rust agents, and anti-foam agent. It can promptly stop the leakage in cooling system. The natural fire will not clog the channels of radiator, but completely clear away the scum and rust in the cooling system without harm to other parts.

Direction for Use
NOTE: EXERCISE CAUTION when removing radiator cap if engine is hot.
1. Before adding this product, fill coolant to above top radiator hose
2. Start engine and turn heater on
3. Run engine until normal operating temperature is achieved
4. Shake bottle well & add slowly to radiator
5. Top up coolant & refit radiator cap securely
6. Run engine for 15 minutes to allow product to circulate
7. Inspect for leaks

Cautions:
1. This product should be run out one time.
2. Do not change the tank water within one week after use the system leak stopper
3. Such as long-term water tank is not clean, you should use the TEKORO radiator flush first, then use this leak stopper to ensure that effect a long time.
4. Avoid contact with skin and eyes, keep out of reach of children.

Radiator Stop Leak Product

       Rainbow High Speed Injection Molding Machine have "5H" characteristcs. "5H" means High Speed, High Energy-saving, High Precision, High Efficiency and High Safety. 

    1. High Speed--High precision single cylinder injection system, suitable to high speed injection, low inertia, fast response to speed up and down; maximum injection speed 300~450mm/sec; 30ms response time of speed up and down.

    2. High Energy-saving--Equipped with high performance servo system to save power 30%~80% than normal injection molding machine.

    3. High Precision--Adopts European high grade KEBA controller to control a high precision injection positin and temperature; equipped with high precision MOOG servo valve full close loop injection system;l double cylinder for injection carriage for balance;

    4. High Effciency--The newest optimized design for clamping unit, the clamping motion is fast and stable; plasticization and ejection at the same time, to save molding cycle time; big L/D ratio screw to plasticize material in the shot time;

   5. High Safety--Electrical, mechanical and hydraulic protection device; indipendent safety module to control clamping, injection, feeding and carriage moving; hidden type safety device to inprove security; totally enclosed type sheet metal.

High-speed Injection Molding Machine

High Speed Injection Molding Machine,High Speed Plastic Injection Machine,Electric Injection Molding Machine

Ningbo Rainbow Plastics Machinery Co., Ltd. , https://www.injection-machine.com