Model NO.: FSHG2400
The drying process could be joined after dewatering fabric. The relax dryer machine is used for knitted and woven, open-width and tubular fabric by three-layer belt with heating cylinder. During the drying process. because each layer could be run under different speed, the fabric could be kept in loosen status without any tension, which could dry the fabric, eliminate exceeding water and achieve the natural moisture content of the fabric.Based on the different fabric width and production requirement, we could provide corresponding machine in different models with different chambers as following: FSHG-2000mm /2400mm /2800mm /3200mm/3600 mm, with 2~10chambers.
| Model | FSHG2000/2400/2600/2800 |
| Name | Relax Dryer Machine |
| Application | Drying the fabric |
| Suitable Fabric | Knitted and Woven Fabric |
| Layout | Reference Above Layout |
| Max. Working Width | 2000~2800mm |
| Machine Speed | 0~30m/min |
| Motor | 11kw 2motors/chamber |
| Power Supply | 380V·3P·50HZ (standard) / 220V·3P·60HZ (optional) |
| Working Type | Three-layer net belt cycling |
| Driving Type for net belt | PLC+Inverter control |
| Heat-setting Type | Thermal Oil/ Natural Gas/Steam |
| Max Drying Temperature | 140~160ºC |
| Temp. control type | Automatically |
| Length of Chamber | 2.1M |
| Comments: | Schneider / Honeywell / Siemens / etc famous brand products applied. |
Â
Special Silicone Sealant For Large Panel Glass
Gufeng 7139 Super Large Plate Glass Glue
Product features:
This product is a single component, acetic acid cured silicone glass adhesive, suitable for the assembly or sealing waterproofing of various types of doors and windows, glass engineering, furniture decoration, glass daylighting roofs, point curtain walls, aluminum alloys, glass doors, and windows, and display cabinets in stores. Especially suitable for bonding and sealing the edge lines of integrated ceilings for quick installation, it has fast curing performance and improves construction efficiency.
Instructions for use:
The surface must be clean, dry, and free of oil and dust. Use a suitable solvent such as isopropanol for cleaning, and do not use soap or detergent. For a more beautiful effect, cover the surfaces on both sides of the connection with tape before applying glue; Cut the nozzle according to the required diameter and install it into the glue gun for use; Immediately correct the sealant and remove the masking tape (about 10 minutes). Use solvents such as isopropanol, butanol, or alcohol to remove any remaining sealant.
Storage period:
Keep it in its original sealed state and store it in a cool and dry place below 27 ° C. The storage period is 12 months.
Responsibility Statement:
Our company guarantees that our products strictly comply with national quality standards, and that all indicators can meet the standard requirements. However, based on differences in specific construction conditions (including substrate, construction method, climate, etc.), pre-testing is necessary to ensure that the products meet specific purposes and cannot be replaced by information in the instruction manual. Therefore, it is necessary to undergo sufficient pre-testing and independent determination to achieve satisfactory results before it can be widely used. Our company's responsibility for violating quality assurance is limited to returning the purchase cost or exchanging the product. At the same time, our company is willing to provide technical support for our products, including related performance testing and on-site technical guidance. For details, please contact our distributors.
Special silicone sealant for large panel glass, silicone sealant for large panel glass, Special silicone sealant for glass
Shandong Gufeng Technology Co., LTD. , https://www.gfkjgs.com