Main Techical Parameters
Machine Layout
Coil Car&V Plate -- Decoiler -- Press&Guider -- Hydraulic Shovel -- Pinch&Leveler -- Loop -- Side Guider -- Servo Cut Length -- Shear -- Working Table -- XÂ Lifter -- Stacker -- Product Car
About Our Company
WUXI LONGAR MACHINERY MANUFACTORY Co., Ltd is a professional manufacturer and exporter for all kinds of Slitting lines and Cut to Length lines.In the past more than 15 years We have established and keep good business relationship with global customers on basic mutual benefits, contributing to our great business records and reputation.Our products are exported to American& European &South American& Africa &Asian market etc…
The thickness for Slitting line is 0.2-16mm, width range from 200-3000mm, with speed up to 180m/min.
The thickness for Cut to Length line is 0.09-28mm, width range from 200-3000mm, with speed up to 80m/min.
We have achieved CE certificate and SGS certificate .
Our goal is to supply highly quality personalized products by on time delivery with all around service at reasonable cost.Working to extend our presence internationally, we are looking forward to cooperating with your company for mutual benefit.
Contact Jean Sun for inquiry
Wuxi Longar Machinery Manufactory Co.,Ltd
Wuxi Bono International Co.,Ltd
Factory:No.19 Jingxin Road, Xibei Industry Zone, Wuxi, Jiangsu, China
Office:No.1005, 39#, Liandong UÂ Builing, Beitang District, Wuxi, Jiangsu, China
Http://www.Wxlongar.Com
Http://www.Wxbono.Com
Tel:+86 510 82698581
Fax:+86 510 82610322
Mobile:+86 15298417602
Vertical Disc Injection Molding Machine
The working principle of the disc Vertical Injection Molding Machine is to use the thrust of the screw (or plunger) to inject the plastic in the molten state (i.e. viscous flow state) after plasticization into the closed cavity, and then get the product after solidification.
Injection molding is a cycle process, each cycle mainly includes quantitative feeding, melt plasticity, pressure injection, mold filling cooling and mold opening. Take out the plastic part, and then close the mold for the next cycle.
Generally speaking, the molding process of the screw disk injection vertical Injection Molding Machine is as follows: first, add granular or powdered plastic into the cylinder, melt the plastic through the rotation of the screw and the heating of the outer wall of the cylinder, then close the mold, move the injection seat forward, make the nozzle close to the pouring port of the mold, and then inject pressure oil into the injection cylinder to push the screw forward, so that the high pressure can inject the melt into the closed mold with a relatively low temperature at a faster speed. After a certain period of time and pressure maintaining (also called pressure maintaining) cooling, solidify it into shape, and then open the mold to take out the product (the purpose of pressure maintaining is to prevent the melt from flowing in the mold cavity in reverse, supplement the mold cavity material, and ensure that the product has a certain density and dimensional tolerance). The basic requirements of injection molding are plasticization, injection molding and molding.
Vertical Disc Injection Molding Machine,Second Hand Vertical Injection Moulding Machine,Vertical Plastic Injection Moulding Machine,Vertical Injection Machine
Ningbo Chenwei Machinery Technology Co.,Ltd , https://www.chenweimachine.com