Introduction of superwand hand held metal detector
The SuperWand's exclusive 360 degree detection field provides uniform sensitivity and tip pinpointing to detect weapons and other metal objects with extreme accuracy.
From airports to sporting events, the SuperWand is the hand-held of choice for today's security screener.
It is one of the best metal detector.
Â
Features include of hand held metal detector:
•Optimum sensitivity with automatic retuning - never needs adjusting
•Accurate detection of all ferrous, non-ferrous and stainless steel weapons, contraband and other metallic objects
•Elongated profile offers 360 degree detection coverage plus tip pinpointing for easy scanning from head to foot
•Easy and convenient to use with one-touch button and three-color LED lights
•Clear audible or Silent / Vibrate LED alarm signalÂ
•Rugged injection molded construction including structurally isolated coil for added impact absorptionÂ
•Large 9.5" scan area allows thorough scanning with minimum passes
•Ergonomically designed grip fits comfortably in virtually every hand
•Easy ON / OFF battery cover
•9V battery (included) operation
•Power switch and LEDs positioned for easy access and high visibility
•Full spec sheet
•Volume and export prices available
Â
Specification of walk through metal detector:
Detection sensitivity:2.0mm stell ball
Power supply: 9V fold battery(6F22ND)
Operation frequency: 95khz
Power consumption: 260mW
Current: less than 50nA
Net weight: 500g
Â
Applications:
1.Airports
2.Correctional Facilities
3.Arenas
4.Public Buildings
5.Private Buildings
6.Schools
7.Special Events
8.Loss Prevention
9.Nuclear Facilities
10.Transportation Terminals
11.Courthouses
12.Corporate Security
13.Historical Landmarks
Â
Notes :
1, When the sensitivity adjustment too high, the boot will be issued after the continuous alarm sound, the sensitivity can be reduced.
2, Cut off the power after use. Long-term should not remove the battery to prevent overnight, so as not to damage the circuit.
3, The probe is fixed against a crackling sound when the metal will stop only when the metal continues to sweep audible.
4.When turned on, the green light to dark and continuous alarm indicates that the voltage is less than has been unable to work , you should replace the battery .
Introduction of superwand hand held metal detector
The SuperWand's exclusive 360 degree detection field provides uniform sensitivity and tip pinpointing to detect weapons and other metal objects with extreme accuracy.
From airports to sporting events, the SuperWand is the hand-held of choice for today's security screener.
It is one of the best metal detector.
Â
Features include of hand held metal detector:
•Optimum sensitivity with automatic retuning - never needs adjusting
•Accurate detection of all ferrous, non-ferrous and stainless steel weapons, contraband and other metallic objects
•Elongated profile offers 360 degree detection coverage plus tip pinpointing for easy scanning from head to foot
•Easy and convenient to use with one-touch button and three-color LED lights
•Clear audible or Silent / Vibrate LED alarm signalÂ
•Rugged injection molded construction including structurally isolated coil for added impact absorptionÂ
•Large 9.5" scan area allows thorough scanning with minimum passes
•Ergonomically designed grip fits comfortably in virtually every hand
•Easy ON / OFF battery cover
•9V battery (included) operation
•Power switch and LEDs positioned for easy access and high visibility
•Full spec sheet
•Volume and export prices available
Â
Specification of walk through metal detector:
Detection sensitivity:2.0mm stell ball
Power supply: 9V fold battery(6F22ND)
Operation frequency: 95khz
Power consumption: 260mW
Current: less than 50nA
Net weight: 500g
Â
Applications:
1.Airports
2.Correctional Facilities
3.Arenas
4.Public Buildings
5.Private Buildings
6.Schools
7.Special Events
8.Loss Prevention
9.Nuclear Facilities
10.Transportation Terminals
11.Courthouses
12.Corporate Security
13.Historical Landmarks
Â
Notes :
1, When the sensitivity adjustment too high, the boot will be issued after the continuous alarm sound, the sensitivity can be reduced.
2, Cut off the power after use. Long-term should not remove the battery to prevent overnight, so as not to damage the circuit.
3, The probe is fixed against a crackling sound when the metal will stop only when the metal continues to sweep audible.
4.When turned on, the green light to dark and continuous alarm indicates that the voltage is less than has been unable to work , you should replace the battery .
Casting is a manufacturing process in which a liquid material is usually poured into a mold, which contains a hollow cavity of the desired shape, and then allowed to solidify. The solidified part is also known as a casting, which is ejected or broken out of the mold to complete the process. Casting materials are usually metals or various cold setting materials that cure after mixing two or more components together; examples are epoxy, concrete, plaster and clay. Casting is most often used for making complex shapes that would be otherwise difficult or uneconomical to make by other methods.
Sand Casting method (Sand Casting)
Using Sand as Mold material, according to the different components of Sand can be subdivided into wet Sand casting method of Green Sand Mold), surface Dry Sand casting method (Dry Sand Mold), and so on, but not all are available in the casting.
Advantage is lower cost, because the sand mold use reusable;
We can supply big range of such sand Casting Parts.
B. Main particulars
|
|
MAIN PARTICULARS |
|
Material for product |
carbon steel, alloy steel, stainless steel, aluminum alloy, zinc alloy, brass, gray iron, nodular cast iron, ductile Iron or other specified |
|
Standard |
ASTM, ASME, DIN, JIS, ISO, BS, API, EN |
|
Certificate |
ISO9001 |
|
Dimension |
As per drawing, as large as we can |
|
Processing |
Step1:sand casting Step2:turning, milling, drilling, grinding, threading, CNC Machining, boring |
|
Finishing surface |
Machined surface with oil, blasting and painting, anodize, polishing, powder painting, electrophoretic coating- |
|
Marking |
as per clients` requirements |
|
Inspection |
material, construction, dimension, heat treatment, hardness, NDT |
|
Quality |
ISO9001, PPAP control production |
|
Lead time |
20-30 days for sample, consult with customer for mass production |
|
Delivery |
Express for sample, ocean shipping/air for mass production |
|
Our Capabilities |
CNC machining, CNC center machining, drilling, milling, turning, grinding, tapping, boring |
|
Engineering & manufacturing services |
R&D process, tooling and gauging design, product design Integrated CAD/CAM system, test and measuring |
|
Others |
Recyclable, in line with environmental requirements and standards, and reliable |
C. Construction
Construction by sand casting
D Workmanship
The workmanship have good production practice. Care are taken to ensure High accuracy and smooth surfaces
E. Certificates
- Material certificates
- Measuring reports
- Inspection protocol
- NDT reports
- Fixed certificate: ISO9001 certificate
Our service
Besides above the general specifications, we can also supply some specific machining parts as clients' requirements.
Package and shipping
Export cartons, pallets, wooden cases, Polybags
Sand Casting Parts,Oem Sand Casting Parts,Stainless Steel Sand Casting,Aluminum Sand Casting Parts
Shinvast Industry Ltd , https://www.shinvastindustry.com