There are always some problems in driving. Today we talk about the reasons why truck clutches are not separated and their solutions.
1, first of all you have to first check the clutch oil in the clutch is not enough to use, if there is not enough oil where the clutch can be used? If the oil level inspection is normal, then the first step on the car more than a few feet clutch, to see if there are files Improvements, if any, are due to the presence of air in the clutch oil circuit.
2. If there is enough oil, check whether there is any oil leakage around the clutch master cylinder and the clutch cylinder. If there is oil leakage, without considering the maintenance, replace the oil leakage points only if the problem is considered. Pump or master pump processing.
3, replace the oil pump or the main pump, refill the brake oil into the clutch at the pump's oil tank, and then find another person to help you start a fierce step on the clutch stepped on a certain number of times to hold on, the other The person evacuates the air underneath and locks the air screw after platooning, and then repeats the above process until the feeling of unloading to the clutch is high. Lock the air release screw. Simultaneously check the free play of the sharing pusher of both the clutch cylinder and the master cylinder, typically around two to three millimeters. Feel a little clearance.
4, wipe clean grease, on the car stepped on the clutch file, see the clutch is a normal separation, the file is smooth and no teeth hit the phenomenon, with or without other faults, such as clutch separation is normal, the fault is resolved.
5, clutch master cylinder or sub-pump if the seal is not strict, single replacement repair kits generally can not guarantee the quality, may appear over a period of time the above failure, it is recommended to replace the assembly handle it.
320/420/520 Series Stretch Film Vacuum Packing Machine
hangzhou mankun imp. exp. co., ltd. , https://www.multihz.com