Model NO.: ZZ1317V4667N1
Seats: ≤5
Horsepower: 351-450hp
Engine Capacity: ＞8L
Tire Certification: ISO
Tire Design: Radial
Condition: New
Trademark: SINOTRUK HOWO A7
Transport Package: Nude Packing
Specification: 11600*2550*3400 mm
Origin: China
Model NO.: ZZ1317V4667N1
Seats: ≤5
Horsepower: 351-450hp
Engine Capacity: ＞8L
Tire Certification: ISO
Tire Design: Radial
Condition: New
Trademark: SINOTRUK HOWO A7
Transport Package: Nude Packing
Specification: 11600*2550*3400 mm
Origin: China
Contact InformationLewis Liu
Foreign Trade Salesman
Mobile:+86-137 9111 8265
Â
If you are interested in our trucks, please feel free to contact me at any time.
Welcome to vist our factory!
Add: D2601, Donghuan International Plaza, Jinan, China
Fax:+0531-83532996
Zip/Postal Code 250031
Â
| Chassis Model | ZZ1317N3867N1,ZZ1317V3867N1,ZZ1317N4667N1,ZZ1317V4667N1 |
| Driving Type | 8X4 |
| Cabin | A7-W cab, with one sleeper and two seats, 2-arm windscreen wiper system with three speeds, damped adjustable driver's seat, with heating and ventilating system, exterior sun visor, safety belts,  adjustable steering wheel, air horn,air conditioner , with transverse stabilizer,with 4-point support fully floating suspension + shock absorber. A7-V--HOWO high roof cabin. Basic configuration is with double sleeper. and others is similar to the A7-W. |
| Engine | Make: SINOTRUK Diesel 4-stroke direct injection diesel engine Engine model: WD615.47,  371 HP;D12.42-20,420HP;WD615.69.336HP; Emission :Euro 2 6-cylinder in-line with water cooling, turbo-charging and intercooling Displacement: 9.726 L /11.596 |
| Transmission | HW19710/HW13710, 10F & 2R |
| Steering | ZF power steering, modol ZF8118, hydraulic steering with power assitance; |
| Front Axle | HF9, 1x9000 KGS Steering with doubleT-cross section beam |
| Rear Axle | HC16, 2x16000 KGS  Pressed axle housing, central single reduction with hub reduction,with differential locks between wheels and axles.  Ratio:4.42 |
| Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange |
| Chassis | Frame: Uprofile parallel ladder frame with section of 300x80x8mm,reinforced subframe all cold riveted cross members Front suspension:10 semi elliptic leaf spring, hydraulic telescopic double-action shock absorbers and stabilizer Rear suspension:12 leaf semi elliptic springs, bogie spring and stabilizer |
| Brake | Service brake: dual circuit compressed air brake Parking brake (emergency brake): spring energy, compressed air operating on front shaft and rear wheels Auxiliary brake: engine exhaust brake |
| Electrics | Operating voltage: 24 V, negative grounded Starter: 24 V, 5.4 Kw Alternator: 3-phase, 28 V, 1500 W Batteries: 2 x 12 V, 165 Ah Cigar-lighter, horn, headlamps, fog lights, brake lights, indicators and reverse light |
| Tyres | 12.00R20(11), one spare tyre |
| Fuel Tank | 400L |
| Cargo Body | Length:7.1M,7.65M,9.5M;Width:2.3M;Height:0.6-1.5M |
| Overall Dimension  | 11600*2550*3400 mm |
Contact InformationLewis Liu
Foreign Trade Salesman
Mobile:+86-137 9111 8265
Â
If you are interested in our trucks, please feel free to contact me at any time.
Welcome to vist our factory!
Add: D2601, Donghuan International Plaza, Jinan, China
Fax:+0531-83532996
Zip/Postal Code 250031
Â
| Chassis Model | ZZ1317N3867N1,ZZ1317V3867N1,ZZ1317N4667N1,ZZ1317V4667N1 |
| Driving Type | 8X4 |
| Cabin | A7-W cab, with one sleeper and two seats, 2-arm windscreen wiper system with three speeds, damped adjustable driver's seat, with heating and ventilating system, exterior sun visor, safety belts,  adjustable steering wheel, air horn,air conditioner , with transverse stabilizer,with 4-point support fully floating suspension + shock absorber. A7-V--HOWO high roof cabin. Basic configuration is with double sleeper. and others is similar to the A7-W. |
| Engine | Make: SINOTRUK Diesel 4-stroke direct injection diesel engine Engine model: WD615.47,  371 HP;D12.42-20,420HP;WD615.69.336HP; Emission :Euro 2 6-cylinder in-line with water cooling, turbo-charging and intercooling Displacement: 9.726 L /11.596 |
| Transmission | HW19710/HW13710, 10F & 2R |
| Steering | ZF power steering, modol ZF8118, hydraulic steering with power assitance; |
| Front Axle | HF9, 1x9000 KGS Steering with doubleT-cross section beam |
| Rear Axle | HC16, 2x16000 KGS  Pressed axle housing, central single reduction with hub reduction,with differential locks between wheels and axles.  Ratio:4.42 |
| Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange |
| Chassis | Frame: Uprofile parallel ladder frame with section of 300x80x8mm,reinforced subframe all cold riveted cross members Front suspension:10 semi elliptic leaf spring, hydraulic telescopic double-action shock absorbers and stabilizer Rear suspension:12 leaf semi elliptic springs, bogie spring and stabilizer |
| Brake | Service brake: dual circuit compressed air brake Parking brake (emergency brake): spring energy, compressed air operating on front shaft and rear wheels Auxiliary brake: engine exhaust brake |
| Electrics | Operating voltage: 24 V, negative grounded Starter: 24 V, 5.4 Kw Alternator: 3-phase, 28 V, 1500 W Batteries: 2 x 12 V, 165 Ah Cigar-lighter, horn, headlamps, fog lights, brake lights, indicators and reverse light |
| Tyres | 12.00R20(11), one spare tyre |
| Fuel Tank | 400L |
| Cargo Body | Length:7.1M,7.65M,9.5M;Width:2.3M;Height:0.6-1.5M |
| Overall Dimension  | 11600*2550*3400 mm |
Dish Head Expanding Machine, Dished Head Flanging Machine, Elliptical Head Forming Machine, Tank Head Expanding Machine
Dish Head Expanding Machine,Spinning Machine Co., Ltd , http://www.chinacuttingandwelding.com