Introduction
Melting material, through material distributor, drips down to the steel belt which is moving evenly. Under the belt, there are continuous sprayer and cooling device which can cool, solidify and pelletize material on belt as soon as possible. According to material feature and process requirements, outward turning, rotating,reciprocating, gate types are available for your choice. Based on material feature and use requirements, material distributing forms like incontinuous dripping, continuous strip, full-width overflowing are available, and with hemispheric, bar, flake products.
Application:
The plant is applied to products with the melting point below 250°C for curing and shaping. Typical applied materials include: Sulphur, Paraffin Wax, Resin, Asphalt, Maleic Anhydride, Trimellitic Anhydride, Salt Stearate, Hot-Melt Adhesives, M-Phenylenediamine, Urea, Rubber and Plastic Auxiliary etc.
Â
Working principle:
Melting material, through material distributor, drips down to the steel belt which is moving evenly. Under the belt, there are continuous sprayer and cooling device which can cool, solidify and pelletize material on belt as soon as possible. According to material feature and process requirements, outward turning, rotating, reciprocating, gate types are available for your choice. Based on material feature and use requirements, material distributing forms like incontinuous dripping, continuous strip, full-width overflowing are available, and with hemispheric, bar, flake products.
Specification:
| Model | LY600-3 | LY1200-5 | LY1500-5 |
| Machine width | 600mm | 1200mm | 1500mm |
| Machine length | 12m | 18.4m | 26m |
| Size of mould | 2.2mm | 2.2mm | 2.2mm |
| Size of products | 4-8mm | 4-8mm | 4-8mm |
| Product's shape | hemispherical | hemispherical | hemispherical |
| Capacity | 300kg/hour | 1000kg/hour | 1500kg/hour |
| Motor | 5kw+2.2kw+4kw | 5kw+2.2kw+4kw | 5kw+2.2kw+4kw |
| Voltage | 380V, 50Hz, 3phase | 380V, 50Hz, 3phase | 380V,50Hz,3phase |
| Water pump | pressuer: 0.3mpa water flow: 15-20m3/h (equipped by user) | pressuer: 0.3mpa water flow: 15-20m3/h (equipped by user) | pressuer: 0.3mpa water flow: 15-20m3/h (equipped by user)Â |
| Â | Â | Â | Â |
| Â | Â | Â | Â |
CNC Milling is a form of computer numerical controlled (CNC) machining. It is a process similar to that of cutting and drilling, and uses a rotational cylindrical cutting tool to remove material from metal components by the movement made within the machine itself.
CNC Milling is used to apply a machined surface finish on engineering-grade plastic or metal or for creating complex 3D shapes. HZ Technology use high Precision Cnc Machining centers with quick-change tooling. HZ Technology toolpaths the digital part design to our CNC machines. During the machining process, a solid block of material is clamped into a CNC mill and cut into a finished part. The range of material choices allows parts to be made with the desired material properties, and good tolerances yield parts suitable for form, fit and function testing.
CNC Milling
CNC Milling,Custom Cnc Machining,Precision Cnc Machining,CNC Milled Parts
Hongzhun technology Co., Limited , http://www.custommoldcomponents.com