- Model NO.: MG
- Max.Capacity: >400 L/min
- Impeller Number: Single-Stage Pump
- Influent Type of Impeller: Single Suction Pump
- Pump Casing Combined: Horizontal Split Pumps
- Impeller: Closed
- Pump Manufacture: Muyuan Pump Industry
- Pump Size: 4-14"
- Pump Wet End Parts: High Chrome
- Transfering Material: Ore Slurry / Coal Slurry / Slag Slurry / Ash Slurr
- Stock: Available
- Transport Package: Plywood Case
- Origin: China
- Max.Head: 50-80m
- Driving Type: Motor
- Working Pressure: Low Pressure Pump
- Position of Pump Shaft: Horizontal Pump
- Mounting Height: Suction Centrifugal
- Usage: Pump, Pumps, Condensate Pump, Ash Pumps, Circulating Pump
- Pump Type: Gravel Pump
- Pump Color: Yellow / Customize
- Pump Seal Type: Gland Seal / Expeller Seal / Mechanical Seal
- OEM Service: Available
- Trademark: MUYUAN
- Specification: CE, ISO 9001, SGS
- HS Code: 8413709990
Â
MG series gravel pumps are designed for continuously handing the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump. The pumps are suitable for delivering slurries in mining, explosive sludge in metal melting, dredging and so on. The advantages of the pump are easy installation and operation, good performance of NPSH and abrasion resistance.Â
Product Features:
-Single casing
-Wide wet-passage
-Wear resistant metal wet end part, long service life
-Discharge direction can be oriented at any degrees
-Good performance of NPSH
Application Range:
Size: 4 inch to 14 inch
Capacity: up to 4320 m3/h
Maximum head: up to 80m
Â
| Model | size | flow | head | characteristic | Material of wet end parts | Produce modelos | Application conditions |
| MG(Gravel Dredging Pump) |
4"-14" | 36-3000 m 3 /h |
5-70m |
-Single casing -Wide wet -passage -Wear resistant metal wet end parts ,long service life -Discharge direction can be oriented at any degrees -Good performance of NPSH Â |
27% High chrome  |
6/4D-MG, 8/6E-MG, 10/8S-MG, 12-10F-MG, 12/10G-MG, 14/12G-MG |
mining explosive sludge in metal melting , dredging |
A shell and tube heat exchanger consists of components such as a shell, heat transfer tube bundle, tube plate, baffle plate (baffle), and tube box. The shell is mostly cylindrical, with a tube bundle installed inside, and both ends of the tube bundle are fixed on the tube plate. There are two types of fluids for heat exchange: cold and hot. One flows inside the tube and is called the tube side fluid; Another type of fluid that flows outside the tube is called shell side fluid. To improve the heat transfer coefficient of the fluid outside the tube, several baffles are usually installed inside the shell. The baffle can increase the velocity of the shell side fluid, forcing the fluid to pass through the tube bundle multiple times according to the specified path, and enhancing the degree of fluid turbulence. The heat exchange tubes can be arranged in equilateral triangles or squares on the tube plate. The equilateral triangle arrangement is relatively compact, with a high degree of turbulence in the fluid outside the pipe and a large heat transfer coefficient; A square arrangement facilitates cleaning outside the pipe and is suitable for fluids that are prone to scaling.
Cooling Shell And Tube Heat Exchanger, Evaporative Shell And Tube Heat Exchanger, Condensing Shell And Tube Heat Exchanger, Heating Shell And Tube Heat Exchanger
Yangzhou Tongyang Chemical Equipment Co., Ltd. , https://www.tongyangchemic.com