Water is removed by the centrifugal force which is produced from semi closed-type
impeller.The semi closed impeller allows big particles as large as 25mm to pass through.
Floating switch controls the pump to start on/off to realize the automatic work at a site.
Applications
Â
Key features
Aluminum corrosion-free telescopic rod is indinitely flexible for different rain barrel height.
 Cordless rain pump could be charged by electric source or solar panel. Fully-charged pumps can be continuously use for more than 30 minutes.Â
Battery box hook easily fix on barrel edge for easy operation.
 Intergrated filter prevent the pump from suctioning too large impurities.
Pump base is faciliate to disassembly and change filter without tool.
 Sturdy pump housing , rust-free stainless steel roter shaft, maintainance-free ball bearings, solid seal make MEDAS pumps particularly durable and problem-free.
Â
.Parameter
Â
| Model | Â | MR2500 | MR2500Â ACCU | MRÂ 2500Â SOLAR |
| Power | W | 350 | 65 | 65 |
| Flow | l/h | 2500 | 1700 | 1700 |
| Head | m | 11 | 11 | 11 |
| Max Submersible depth | m | 3 | 3 | 3 |
| Outlet | inch | 3/4 | 3/4 | 3/4 |
| Solid | mm | '2-3 | '2-3 | '2-3 |
| IPÂ grade | Grade | IPX8 | IPX8 | IPX8 |
| Weight | kg | 4.6 | 4.5 | 6.2 |
| Loading qty | pcs | 1820/3920/4480 | 1584/3344/3724 | 840/1752/2044 |
The MEDAS Group is a developing leading industrial in China in the two business
areas of pump and garden care and consumer goods. The MEDAS Group's products
and services are designed to improve the quality of life by providing solutions that
are both innovative and beneficial.
Since being founded in 1997, MEDAS has rapidly emerged as a company spanning
the entire domestic market. MEDAS has always oriented itself towards fostering
talent and technology-based production, guiding our success with customer support
and trust. Almost all our office staff have a bachelor degree or above and vast operational experience, helping to efficiently provide design and experimental operation as well.
The principle of "Quality comes first" is deeply embedded in the heart of every Medaser,
a principle which MEDAS also reflects on the large scale.
Our service
We take customer needs very seriously. Tasks and challenges are solved together
with the customers - using our high expertise in product technologies, process
technologies and logistics. Our professionalism guides us through the development
and production process.
Knowing the customer is the priority of all we do.With the customers' specific
technical data and requirements fully in mind.We make a promise that every
process of the cooperation is clear. As production begins, we focus on working along
multiple lines. Even once the order has closed, MEDAS still provides meticulous
after-sales service.
Packing and shipping
FAQ
Q: What is our policy of the payment term?
A: -100% advanced payment is the first option we prefer to taking.
-Any order valued less than USD10,000 has to be 100% prepaid.
-Irrevocable L/C at sight is acceptable for most of business.
-Irrevocable L/C with less than 60-day term will be only acceptable for some
business after negotiation.
-Any L/C with more than 60-day term will not be acceptable.
-D/P at sight will be acceptable for some business after negotiation, while other
terms will not be acceptable.
-D/A and O/A will not be acceptable basically.
-Partial payment is negotiable, but normally we require the advanced payment
no less than 30%, and the balance to be paid before shipment
Q: How long will be the lead time for the orders to us?
A: -Normally the lead time for our orders is 45-60 days, depending on the order
quantity and our production schedule.
-Normally the lead time is calculated from the date of receiving the L/C or advanced
payment as agreed in contract.
-Some rush orders might be fulfilled within 30 days or even shorter time, until we
finally approve.
Q: Do we have minimum order requirement?
A: -Yes, the minimum order value has to be USD2,000.
-Any order with less than USD2,000 will be only acceptable after negotiation.
-Sample order is exception.
-As for the minimum quantity for each product, please contact with us for further information.
Â
Aluminum Coolers for Compressor, Aluminum plate&bar Heat Exchangers (oil cooler, Air Cooler /Charge Air Coolers,Compressor Coolers, Water Cooler and Combi Coolers ) have been widely applied for all kinds of compressor including air compressors, LNG-BOG recovery compressor, CNG compressor and more.
Heat Exchanger for Air Dryer, The heat exchangers transfer heat between a cold medium and the damp compressed air. This cools the compressed air to a pressure dew point. If required the condensation generated by the cooling process is collected in a condensation chamber integrated into the heat exchanger and continually drained off.
Advantage:
Compact, Lightweight, High Efficient Heat Transfer
Customize High Quality Aluminum plate-fin cooler upon your drawing, sample or parameter requirement.
FAQ
Q1:Could you customize oil cooler/heat exchanger?
We can manufacture plate-fin heat exchanger/oil cooler /intercooler according to your drawings or samples or parameter requirement.
Q2: I want to buy your products, how can I pay?
A :You can pay via T/T
Q3: How can you guarantee the quality?
A: One year's warranty against B/L date.
Q4: If we don`t find what we want on your website, what should we do?
A: You can email us the descriptions and pictures of the products you need, We will check whether we can make it.
Q5: Can we buy samples of each item for quality testing?
A: Yes, we understand quality test is important and we are glad to send the sample for quality testing.
Q6: What is the lead time?
A: Normal : Plate-fin heat exchanger for 2~3 weeks; Tube&fin or stacked layer coolers for 5 weeks. Exact time upon negotiation
Air Compressor Oil Cooler,CNG Compressor Aluminum Cooler,Compressor Gas Cooler and Radiator Assembly,Compressor Coolers,Charge Air Coolers
Wuxi Better Technology Co., Ltd , http://www.btheatexchanger.com