The essence and process of the VCR method

The mining method in the rock drilling stage, which is widely used at home and abroad, is the Vertical Crater Retreat Method (VCR method). The essence of the method is to use the underground down-the-hole drilling rig to drill the vertical or inclined deep hole to the bottom layer in the horizontal layer of rock drilling at the top of the mine, according to the optimal hole network rig , using high power, high density and high detonation speed. Low-sensitivity explosives ("three high and one low explosives") in a spheroidal package (the ratio of diameter to length is not more than 1:6) from bottom to top, stratified blasting in the lower bottom space, and high Efficient mining equipment (scraper) for ore shipments (Figure 1).

Figure 1 Schematic diagram of the VCR method

1—supporting anchor; 2—rock drilling space; 3—transporting alley; 4—third blasting layer; 5— second blasting layer;

6—spherical drug pack; 7—first blasting layer; 8— lower horizontal layer; 9—mineral crossing lane; 10—receiving trench;

1 ) Stope layout

According to the thickness of the ore body, the mining area can be arranged along the direction of the ore body and the vertical ore body. When the thickness of the ore body is above 20 m, the vertical ore body is generally arranged. The length of the mine is generally equal to the thickness of the ore body. The width of the mine depends on the stability of the rock: when the rock is stable, it is generally 10~15m or more; when the rock is not stable, it is 5-8m. The height of the stage depends on the stability of the rock and the effective rock drilling depth of the down-the-hole drilling rig , generally 40~60m. If the ore body thickness is less than 20m, the long side of the mine is arranged along the ore body, and the length depends on the stability of the rock.

2 ) Precision cutting

The roadway 3 is transported in the tunneling stage of the surrounding rock, and the loading and unloading lane 9 is mined from the junction of the mine and the column at the stage roadway. The mine diaphragm and the V-shaped trench are excavated on the side of the mineway. 10, forming a pull level of 8. At the upper part of this stage, the rock drilling chamber is excavated and the rock drilling space is enlarged.

3 ) Recovery

A deep hole drilling machine is used to drill parallel deep holes in the rock drilling space, and the bottom-up segment is charged and layered blasting. The effectiveness of the VCR blasting method is closely related to the quality of the blasthole. The slant slope is one of the main indicators for measuring the quality of the blasthole and must be strictly controlled. When the hole depth is 60m, the slope should be controlled within 1%. The explosive is in the form of a spherical drug pack. The caving ore falls to the bottom of the mine with its own weight, and is transported by the scraper through the v-shaped trench. Each time the mine is discharged, only about 40% of the collapsed amount is released. As the compensation space for the next layer of blasting, about 60% of the ore is retained in the stope to support the surrounding rock and the surrounding rock. .

4 ) Ventilation

Ventilation during mining of the mine mainly ensures smooth air flow in the rock drilling space and the level of mining.

Hot sale

This is a catelogy that included many hot sale kinds of car accessory.After careful analysis, we put all kinds of popular products into this category.The products in this catelogy are all very hot sale and we prepare for to help you more quickly to find which is your really want.You can see all kinds of products here. If you take them home, they will definitely help you increase sales.

Car Humidifier,Car Charger,Car Fan

Ningbo Autrends International Trade Co.,Ltd. , https://www.nbcarcover.com